P-870M-Ix Series User’s Guide

1Use a telephone wire to connect the P-870M-I DSL port to the DSL (or MODEM) port on a splitter. If you do not have a splitter, connect the DSL port directly to the telephone jack.

2Use an Ethernet cable to connect the P-870M-I ETHERNET port to the computer.

3Use the included power adaptor to connect the P-870M-I POWER socket to an appropriate power source.

4After you’ve made these connections, push in the power button.

If the POWER, ETHERNET, and VDSL lights are on (or blinking), you have set up the P-870M-I correctly. Test your Internet connection by visiting http://www.zyxel.com (or another web site).

If the lights behave differently or if you cannot connect to the Web site, make sure the connections are correct. If the lights are still different, turn off the device, wait a few seconds, and turn it on again. If the problem continues, contact your local vendor.

3