Yamaha RX-497 owner manual Specifications

SPECIFICATIONS

AUDIO SECTION

• Minimum RMS Output Power
(8 Ω , 20 Hz to 20 kHz, 0.04% THD)		75 W + 75 W
• Dynamic Power (IHF)
(8/6/4/2 Ω)	105/125/150/178 W
• Maximum Output Power [Europe model only]
(1 kHz, 0.7% THD, 4 Ω)		105 W
• IEC Output Power [Europe model only]
(1 kHz, 0.04% THD, 8 Ω)		84 W
• Power Band Width
(0.08% THD, 35 W, 8 Ω)		10 Hz to 50 kHz
• Damping Factor (SPEAKERS A)
20 Hz to 20 kHz, 8 Ω		150 or more
• Maximum Output Power (EIAJ)
[Asia and General models only]
(1 kHz, 10% THD, 8 Ω)		115 W
• Maximum Input Signal
PHONO (1 kHz, 0.04% THD)		70 mV or more
CD, etc. (1 kHz, 0.04% THD)		2.2 V or more
• Frequency Response
CD, etc. (20 Hz to 20 kHz)		0 ± 0.5 dB
CD, etc. PURE DIRECT ON (10 Hz to 100 kHz)		0 ± 1.0 dB
• RIAA Equalization Deviation
PHONO		± 0.5 dB
• Total Harmonic Distortion
PHONO to OUT (REC)
(20 Hz to 20 kHz, 3 V)		0.02% or less
CD, etc. to SPEAKERS
(20 Hz to 20 kHz, 35 W, 8 Ω)		0.02% or less
• Signal to Noise Ratio (IHF-A Network)
PHONO (5 mV input shorted)		82 dB or more
CD, etc. (185 mV input shorted)		108 dB or more
• Residual Noise (IHF-A Network)
PURE DIRECT ON		100 µV
• Gain Tracking Error (0 to –60 dB)		2 dB or less
• Input Sensitivity/Input..................................................................Impedance		2.5 mV/47 kΩ
PHONO
CD, etc		185 mV/47 kΩ
• Output Level/Output Impedance	185 mV/1.2 kΩ or less
OUT (REC)
SUB WOOFER OUTPUT		4 V/1.2 kΩ
ZONE 2 OUTPUT		185 mV/1.2 kΩ
• Headphone Output/Impedance
(Input 1 kHz,....................................................................185 mV, 8 Ω , 0.015% THD)		0.47 V/390 Ω
CD, etc.
• Channel Separation
CD, etc. (5.1 kΩ input shorted, 1/10 kHz)	65/50 dB or more
• Tone Control Characteristics
BASS
Boost/Cut (20 Hz)		±10 dB
Turnover Frequency		350 Hz
TREBLE
Boost/Cut (20 kHz)		±10 dB
Turnover Frequency		3.5 kHz
• Continuous Loudness Control
Attenuation (1 kHz)		–30 dB

VIDEO SECTION

• Video Signal Type
[U.S.A., Canada and General models]	................................ NTSC
[Other models]	PAL
• Signal to Noise Ratio	50 dB or more
• Frequency Response (MONITOR OUT)
Composite	5 Hz to 10 MHz, –3 dB

FM SECTION

• Tuning Range
[U.S.A. and Canada models]	........................... 87.5 to 107.9 MHz
[Asia and General models]	87.5/87.50 to 107.9/108.00 MHz
[Other models]	87.50 to 108.00 MHz
• Usable Sensitivity (IHF)	1.0 µV (11.2 dBf)
• Signal to Noise Ratio (IHF)
Mono/Stereo	76 dB/70 dB
• Harmonic Distortion (1 kHz)
Mono/Stereo	0.2%/0.3%
• Stereo Separation (1 kHz)	45 dB
• Frequency Response	20 Hz to 15 kHz, +0.5/–2 dB

AM SECTION

• Tuning Range
[U.S.A. and Canada models]	.............................. 530 to 1710 kHz
[Asia and General models]	530/531 to 1710/1611 kHz
[Other models]	531 to 1611 kHz
• Usable Sensitivity	300 µV/m

GENERAL

• Power Supply
[U.S.A. and Canada models]		.............................. AC 120 V, 60 Hz
[Asia model]		AC 220/230-240 V, 50/60 Hz
[General model]	AC 110/120/220/230-240 V, 50/60 Hz
[Australia model]		AC 240 V, 50 Hz
[Europe model]		AC 230 V, 50 Hz
• Power Consumption		180 W
• Standby Power Consumption	.................................................	0.1 W
• Maximum Power Consumption [General model only]
(8 Ω , 1 kHz, 10% THD)		400 W
• AC Outlets
[Australia model]		1 (Total 100 W maximum)
[General model]		2 (Total 50 W maximum)
[Other models]		2 (Total 100 W maximum)
• Dimensions (W x H x D)		435 x 151 x 308 mm
		(17-1/8” x 5-15/16” x 12-1/8”)
• Weight		8.7 kg (19 lbs. 3 oz.)

* Specifications are subject to change without notice.

INFORMATION ADDITIONAL

45