CONTROLS AND FUNCTIONS
Front panel display
1 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
SP | DVD | DTV/CBL | VCR | MD/TAPE | CD | TUNER | PHONO | XM |
A B | ZONE2 ZONE3 MD/TAPE MON MEMORY AUTO TUNED STEREO SLEEP MUTE |
PTY HOLD
EON
PS PTY
RT CT
0A B
INTRODUCTION
1SP (SPEAKERS) A/B indicators
Light up according to the set of speakers selected. Both indicators light up when both sets of speakers are selected.
2ZONE 2 indicator
Lights up when Zone 2 is turned on.
3Input source indicators
Light up when this unit is in the corresponding mode.
Note
The XM indicator is only applicable to the U.S.A. model.
4MD/TAPE MON (MONITOR) indicator
Lights up while the MD/TAPE monitor function is turned on.
5MEMORY indicator
Flashes for approximately 5 seconds after MEMORY on the front panel is pressed. While the MEMORY indicator is flashing, store the displayed station in the system memory by using A/B/C/D/E and one of the preset station number buttons on the front panel.
6AUTO indicator
Lights up when this unit is in the automatic tuning mode.
8SLEEP indicator
Lights up when the sleep timer is turned on.
9MUTE indicator
Flashes while the MUTE function is turned on.
0
Shows information when adjusting or changing settings.
ATUNED indicator
Lights up when this unit is tuned into a station.
■Europe model only
BRadio Data System indicators
The
PTY HOLD indicator
Lights up while searching for stations in the PTY SEEK mode.
EON indicator
Lights up when the Radio Data System station that offers the EON data service is being received.
7STEREO indicator
Lights up when this unit is receiving a strong signal for an FM stereo broadcast while the AUTO indicator is lit.
5