Yamaha RX-497 Connecting the AM loop antenna, 1Set up the AM loop antenna, 4Release the tab

■Connecting the AM loop antenna

1Set up the AM loop antenna.

2Press and hold the tab.

3Insert the AM loop antenna lead wires into the AM ANT terminal.

CONNECTIONS

5Repeat steps 2 to 4 to insert the AM loop antenna lead wires into the GND terminal.

6Orient the AM loop antenna for the best reception.

Notes

•The AM loop antenna should be placed away from this unit.

•A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. It is recommended that you should connect a 5 to 10 m of vinyl-covered wire to the AM ANT terminal and extend it outdoors from a window. Consult your nearest authorized YAMAHA dealer or service center about outdoor antennas.

•The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit.

PREPARATION

4Release the tab.

13