CONTROLS AND FUNCTIONS
9SPEAKERS A/B
Turns on or off the set of speakers connected to the SPEAKERS A and/or SPEAKERS B terminals on the rear panel of this unit when the corresponding button is pressed each time.
0CODE SET
Use to set up remote control codes (see page 41).
ASLEEP
Sets the sleep timer.
BVOLUME +/–
Increases or decreases the sound output level.
Notes
•This does not affect the OUT (REC) level.
•When you press VOLUME +/– to control the sound output level of this unit, VOLUME on the front panel rotates.
CMUTE
Mutes the sound output. Press again to restore the sound output to the previous volume level (see page 19).
Note
The sound output to Zone 2 is not muted.
DENT. (ENTER)
Confirms an entered channel number during the Direct Number Access mode when XM is selected as the input source.
ESRCH (SEARCH) MODE
Switches between the XM Satellite Radio search modes (see page 31) when XM is selected as the input source.
FDISPLAY
Switches the XM Satellite Radio information shown in the front panel display between channel number/name, category and artist name/song title when XM is selected as the input source.
Note
The XM Satellite Radio features (XM, SRCH MODE, DISPLAY,
8