Chapter 6 Powerline Network Setup Tutorial

3To set up a new powerline network, type the DAK Password and change the Network Name on all powerline adapters you wish to add to your network.

•Look for the DAK Password on a label on your powerline adapter. The DAK Password lets you access the adapter.

•Select the Remote adapter you want to add (A) and type the DAK Password in the DAK Password field (B).

•Then type the new network name in the Network Name field.

Figure 39 Adding an Adapter to Your New Network

A

B

4Click Save.

•If you do not type the DAK password or type it incorrectly either of the following pop- ups appear. Click OK and type the DAK Password correctly in the DAK Password field.

Figure 40 Incorrect DAK or No DAK

• If you have correctly entered the DAK Password, click OK on the pop-up.

Figure 41 Correct DAK

5The settings for the adapter will now grey out and the adapter will disappear from the table after a few minutes.

 

57

PLA-4xx Series User’s Guide