Chapter 5 The Configuration Utility
5.3 Configuration Screen
Use the Configuration screen to see which devices are recognized by your powerline network, to configure your
"Use the 
icon to view online help information in each screen of the utility.
Figure 25 Configuration Screen
The following table describes the labels in this screen.
Table 5 Configuration Screen
LABEL | DESCRIPTION |
Network | Use this to select which powerline network information is displayed. Different |
Topology | powerline networks are identified by the Ethernet interface (network card) connected |
| directly to the |
| computer has two network cards and both are connected to a powerline device then |
| you have two powerline networks. |
|
|
The fields described below are used to identify the powerline adapters recognized on the powerline network. The configuration utility automatically updates this information every 10 seconds. Click Scan to refresh the information in these fields (immediately).
Note: Only devices which share the same network name are displayed in this table.
Site | This field displays | |
| • | Local, if it is identifying the powerline adapter directly connected to the computer |
|
| running the configuration utility. |
| • | Remote, if it is a powerline adapter in your powerline network but not directly |
|
| connected to the computer running the configuration utility. |
|
|
|
| 47 |
|
|