ENGLISH
2 Press the ENCRYPT button at the rear of your powerline device for 
) light will blink as the powerline device tries to set up a connection.
1...2
1...2
•If the power (
) light does not blink, you have probably pressed the ENCRYPT button for too long. Try again, press- ing the ENCRYPT button for
3 Repeat step 2 in this section for the other powerline device you wish to connect. This must be done within 120 seconds of pressing the ENCRYPT button on the PLA470.
4Check the lights on the two powerline devices. The power
(
) and HomePlug (
) lights should be blinking. Occasionally all lights may blink at the same time and the
HomePlug (
) light may also show red. Wait for roughly one minute while your powerline devices connect.
•If the HomePlug (
) lights on both powerline devices do not light up, the powerline devices are not connected. Repeat steps 2 and 3 in this section. If that doesn’t work,
8