PoE-80 User’s Guide

5.4 Parametric Information

This section of the screen displays individual port parameters.

LABEL

DESCRIPTION

 

 

Discovery R (ohms)

This field displays the port’s resistance value.

Port Current (mA)

This field displays the port’s current value.

Port Voltage (V):

This field displays the port’s voltage value.

Port Power (W)

This field displays the port’s watt value.

Class Current (mA)

This field displays the port’s class current value. This class current value

 

does not display when you enable the bypass classification function.

Determined Class

This field displays the port’s power class. The class value does not display

 

when you enable the bypass classification function.

6 Troubleshooting

Make sure you have securely attached the proper cables to the proper ports. Refer to the Rear Panel Connections and Front Panel Connections sections for this information. If your PoE-80 still does not work properly, refer to the table shown next.

PROBLEM

CORRECTIVE ACTION

 

 

No LEDs are on when I

Check to see that the power cord is properly connected to the PoE-80

turn on the PoE-80.

and an appropriate power source.

 

Make sure the power source is turned on and that the PoE-80 is

 

receiving sufficient power.

 

Contact your local distributor if the problem persists.

The PWR FWD LED is

Check to see that the Ethernet cables are connected properly.

not on or is blinking.

Contact your local distributor if the problem persists.

21