PoE-80 User’s Guide

LABEL

DESCRIPTION

Master Enable

This field enables or disables the use of the utility to control the ports. You

 

must enable this item to the utility to control the ports.

Calibrate System

When the PoE-80 is not functioning properly, select this check box and click

 

Save to Device to reset the PoE-80 to the default settings. The device

 

resets and the PWR FWD and PWR OFF LEDs flash.

 

 

You must disconnect all of the PoE-enabled devices

 

 

from the PoE-80 before you calibrate the system.

 

 

 

PD Discovery

Set the upper and lower limit resistor values for the discovery of Powered

R(ohms)

Devices (PD). The range is 19500~26500.

5.2 System Information

This section of the screen displays the hardware version, firmware version and the reset, update, port control function buttons.

LABEL

DESCRIPTION

 

 

Chip Version

This displays the version of the PoE-80’s chipset.

18