VIZIO VL420M/VL470M User Manual
16
www.VIZIO.com
VIZIO Remote Control
INFO – This button displays program information.
POWER ( ) – Press this button to turn the TV on from the Standby mode.
Press it again to return to the Standby mode.
TV – Press this button to select TV.
AV – Press this button to select AV1 and AV2 (either Composite or S-Video)
input.
COMP – Press this button to select Component 1 and Component 2 inputs.
HDMI – Press this button to select the HDMI input. By pressing it repeatedly
you will go through all HDMI inputs in sequence.

#II – Press this button to display the Channel List. In Multi Media mode,

press this button to select folders and files and to play/pause a slideshow,
playing music, or movies.
!"$ # -These buttons are used to navigate the OSD menu. They will
also be used as value settings when the slide bar is shown on the screen
and option settings to turn a feature off or on.
MENU – Use this button for the On-Screen Display (OSD) menu. When it is
used within a menu selection, pressing this button will select the feature after
it has been highlighted.
EXIT – Press this button to exit from the On-Screen Display (OSD) menu
VOL !/" – This button turns the volume up or down.
CH !/" – This button changes the channels up or down.
MUTE – This button turns the sound on and off.
MEDIA – Press this button to view pictures, listen to music, or watch movies
on a USB drive connected to the Multi Media port on the side of the HDTV.
LAST – This button recalls the previously viewed channel. If the On-Screen
Display (OSD) menu is being used, this button will allow you to get back to
previous menu screen or out to your program when you press it repeatedly.
NUMBER BUTTON PAD – Use these buttons to select a channel or enter a
password.
INPUT – This button allows the user to cycle through the inputs. Repeatedly
pressing this button will step you through the input sources in the following
sequence: TV, AV1, AV2, Component1, Component2,
RGB, HDMI1, HDMI2, HDMI3, and HDMI4. Once you have
stepped through the entire sequence, you will return to the
beginning.
- (DASH) – When selecting a digital channel directly, use
this button between the main and sub-channels. For
example, channel 28-2 would be selected by the button
sequence 2, 8, DASH, 2.