ZyXEL Communications X-550 Next, Next

ZyXEL X-550

Make sure your USB flash drive is installed and your computer has recognized the USB drive. Then click Next to continue.

Follow the on-screen instructions provided and when ready, click Next to continue.

1.Plug the flash drive into your wireless access point. Many devices will blink their lights three times when the transfer is complete; otherwise wait 30 seconds.

2.Plug the flash drive into each computer or device you want to add to your network.

3.Plug the flash drive back into this computer, and then click Next..

Contents

Page 1 Introducing the ZyXEL 2 Hardware Installation 2.1 Rear Panel 2.2 Front Panel LEDs 3 Configuring Your ZyXEL 3.1Accessing Your ZyXEL X-550For The Very First Time Via Web Configurator LOGIN admin Login 3.2 Wizard Setup BASIC > START Launch Internet Connection Setup Wizard Launch Wireless Security Setup Wizard Finish 3.2.1 Internet Connection Setup Wizard Quick Start Guide Setting Up a Dynamic IP Address (DHCP) Connection Clone Your PC’s MAC Address Host Name Connect Setting Up Username/Password (PPPoE) Connection User Name Password Service Name Setting Up Static IP Address Connection Static IP Address Connection bubble Type in the IP Address, Subnet Please at this time reboot both your cable or DSL modem and your 3.2.2 Wireless Security Setup Wizard The screen shown is only an example. Yours might differ slightly Save 3.3 Setup a Wireless Connection using Windows Connect Now Set up a new wireless network Add new computers or devices to the “ name of your network ” network Choose Use a USB flash drive Next 3.4 Test Your Internet Connection 4 Troubleshooting 5 Customer Support Serial number •Warranty Information Date