
Chapter 1 Introducing the
Install SFP (Small
Discovery and Dependency Mapping Inventory (DDMI) reads the transceiver temperature and voltage.
SFP/CSFP Tx Manual Power DisableManually disables the transfer (Tx) power of individual transceivers.
Subnet Based VLANSubnet based VLAN allows you to group traffic into logical VLANs based on the source IP subnet you specify. When a frame is received on a port, the
xVLAN changes the VLAN IDs (VIDs) of subscriber traffic before sending it to the service provider’s network. It also changes the VIDs of traffic from the service provider’s network before sending it to the subscriber. This lets you use unique VLANs for each subscriber but still deploy all the CPE devices with the same VLAN configuration.
Upstream Broadcast Storm ControlBroadcast storm control lets you set limits for how many broadcast, multicast and destination lookup failure (DLF) packets a port receives per second from the subscriber.
Downstream Broadcast VLAN ControlDownstream broadcast VLAN control allows you to block downstream broadcast packets from being sent to specified VLANs on specified ports. This helps to reduce downstream bandwidth requirements on a subscriber line.
MAC Count LimitYou can limit the number of MAC addresses that may be dynamically learned on a port. You may enable/disable the MAC count filter on individual ports.
Rate LimitingRate limiting on the subscriber ports allows service providers to offer tiered service in increments of 64 Kbps. This service differentiation is not only to fulfill the needs of different customers, but also to provide a network infrastructure that combines guaranteed performance and flexibility in service provisioning.
8 |
|
|
|