Allied Telesis AT-EN646, AT-iMG646PX-ON manual Installing the Enclosure

Chapter 3: Installing the Enclosure

5.Route the fiber cable 1-1/2 times around the splice tray to the splice organizer and cut it to a length that will allow the splice to be placed in the organizer, as shown in Figure 22.

Figure 22. Setting the Fiber Cable in the Splice Tray

6.Cut the SC/UPC pigtail cable (not provided) 29.25 in. (74.30 cm) beyond the boot.

7.Strip the SC/UPC pigtail jacket to expose 13.75 in. (39.93 cm) of fiber.

8.Clean the fiber, and splice it to the pigtail, per the splice manufacturer’s instructions.

9.Route the pigtail once around the splice tray and out through the upper left corner and secure it with another wire tie, as shown in Figure 23.

Figure 23. Securing the Pigtail

The pigtail should extend 15.5 in. from the splice tray.

46 Section I: Outdoor Installation