Placing Horizontally On a Tabletop Or Shelf
1.Attach the rear support into the channel on the rear of the speaker using the included ¼-20 machine screw. Tighten the set-screw finger-tight to stabilize the support.
2.Attach two rubber hook-shaped stick-on feet symmetrically along the bottom edge of the speaker approximately 10” apart. If you are mounting the speaker on an uneven surface you may need to attach the feet closer to the center. Adapt the actual position to your needs.
3.Remove the logo by pulling it straight out. Turn it 90 degrees so that the text reads correctly. Press it back in place.
Logo Orientation
Rubber Feet
