Muratec F-160 Katz’s Cat Care A4 Normal, Tel Mode 555-2842, Select One-Touch

Beyond the Basics

One-touch fax dialling

To dial a fax call using a one-touch number:

1 Insert the document.

2 Adjust resolution and contrast if necessary.

3 Toggle between transmission from the feeder or from memory if necessary, by

pressing MEMORY TRANSMIT.

4 Press the one-touch key in which you’ve stored the number.

What happens next depends on whether you specified transmission from memory or transmission from the feeder:

If you specified Quick Memory transmission:

•Your fax machine scans the first page of your document into memory, then dials the other fax machine.

•While dialling, your machine scans the other documents into memory.

•The LCD shows the Location ID and the document’s width and resolution settings:

Katz’s Cat Care

A4 Normal

Note: If the entry doesn’t have a Location ID, the number appears.

•When the other machine answers, your fax transmits the scanned document directly from memory. (To review Quick Memory transmission, see page 2.29.)

If you specified normal transmission from memory:

•Your fax machine scans your entire document into memory first, then dials the other fax machine.

•The LCD shows the Location ID and the document’s width and resolution settings:

Katz’s Cat Care

A4 Normal

Note: If the entry doesn’t have a Location ID, the number appears.

•When the other machine answers, your fax transmits the document directly from memory. (To review memory transmission, see page 1.13.)

If you specified transmission from the feeder:

•Your fax machine dials the other fax machine.

•When the other machine answers, your fax feeds the document through its scan- ner, transmitting as it goes.

•The LCD shows the Location ID and the document’s width and resolution settings:

Katz’s Cat Care

A4 Normal

Note: If the entry doesn’t have a Location ID, the number appears.

One-touch phone dialling

To dial a phone call using a one-touch number, you must have an optional handset attached to your machine. (Contact your authorised Muratec dealer to order an optional handset.)

To make the call:

1	Obtain a dial tone by doing one of the following:
	• Lift the handset
	• Press MONITOR/CALL to use the monitor speaker
2	Press the one-touch key in which you’ve stored the number. As the machine
	dials, it shows the number on the LCD:
		** Tel Mode **
		9-555-2842_

Note: Remember that your fax machine’s monitor speaker is not a speakerphone. If you dialled by using the monitor speaker, pick up the handset to speak to the person that answers.

Note: If the call fails, and you used MONITOR/CALL to dial, press MONITOR/CALL to hang up.

Erasing a one-touch number

1	Press /PROGRAM, A, 2, ENTER. The LCD shows the one-touch number you
	have already entered:

Select One-Touch 01:9-1-555-345-6789

Note: If the one-touch number that appears is other than 01, it means that 01 is empty.

2.10