Topcom Butler 4056/4056C
4.27 Barring outgoing calls
You can program the handsets to bar calls to certain telephone numbers so that for instance ‘00’ international numbers cannot be called. Up to 5 numbers (of max. 5 digits) can be barred. To do this, do the following:
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘SETTING’ appears on the display.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘BARRING’ appears on the display.
•Press the Programming key 
.
•‘PIN’ appears on the display.
•Enter your PIN code
•Press the Programming key 
.
•‘BAR NUM ’ appears on the display. You are in memory “1. _ _ _ _ _”.
•Press the Up or Down key 
to select one of the 5 memories.
•Enter the number (max. 5 digits) to be barred, e.g. 01486.
•Press the Programming key 
.
•‘HS _ _ _ _ _’ (= number on the handset
•Enter the numbers of the handsets from which the barred numbers cannot be called.
•e.g. Press the number key 2, 3 and 5. On the display, this will appear: HS _2 3_5 01486 These handsets can no longer dial numbers beginning with ‘01486’.
•Press the Programming key 
to confirm your selection.
Repeat the same procedure described above if you would like to bar other numbers (max. 5)!
4.28 Direct Call
By setting a Direct Call number, the phone will automatically take the line and dial out this number. This function is useful to use the phone as a emergency phone.
4.28.1To program the Direct Call number
• Press the Programming key 
• Press the Up or Down key 
until ‘DIRECT’ appears on the display
• Press the Programming key 
• If necessary, delete the existing number by pressing the
• Enter the direct number
• Press the Programming key 
4.28.2Turn the Direct Call function ON/OFF
To turn it ON:
•Press the Programming key 
•Press the Up or Down key 
until ‘DIRECT’ appears on the display
•Press the 
for 2s
•‘DIRECT ON’ appears on the display
To turn if OFF:
•Quick press the Programming key 
twice
ENGLISH
Topcom Butler 4056/4056C | 23 |
