Topcom 520, 500 Feb 1726 Diversion MSN 1 to Call Waiting active on, Call Waiting OFF, Function

HL_DM5201_GB.qxd 16-04-2003 13:24 Page 23

Deskmaster

• Idle state, LED for the INFO key flashes.

• Scroll the list of programmed features.

• Scroll the list of programmed features.

• Select the displayed function.

Mo. 21 Feb 99 17:26

Diversion (MSN 1) to 07118398262

Call Waiting active (ON)

• Switch function OFF.

The programmed feature “Call Waiting” will be disabled.

9.6 Direct Feature Access

Call Waiting (OFF)

As an experienced user of the ISDN phone, you may use the fast access to your frequently used features by entering a 3 digit function code to directly access those features. This is not possible during a connection. (See section “Menu/Function Overview” with a list of function codes.)

•In idle state: press function key.

•Enter function code; e.g. “140” for charges.

Function :

Function : 140

Note : The accessible function codes depend on the operation mode of the phone. Some functions may only be

valid in certain phone states, e.g. idle state.

•Display of the selected function.

Last Call

V : 1 D : 0

9.6.1 Disable Function Code Display

The function codes can be displayed optionally. By default, this function is enabled.

•Press function key and select code 257. (As an alternative step through the menu “System Configuration”.)

•Display of the selected function.

•Display of function codes will be switched OFF.

Function : 257

Numbers in menu (ON)

OFF

23