Toshiba Dp120F, DP125F manual Date and Time Setting

Date and Time Setting

This facsimile displays the cur- rent date and time when in the Standby Mode. It also uses this time for maintaining internal list and reports. Follow the proce-

1 Display the DATE & TIME Menu

2 Select the Time	3 Enter the Date Data	4 Enter the Time Data
Format

dure to set the time and date.

To display the SETUP menu, press:

+

1.LANGUAGE

2.DATE & TIME 3.TERMINAL ID 4.DIAL TIPE

NOTE: Only 4 selections can be displayed at one time.

Highlight

2.DATE & TIME

using or and press:

or

SET TIME FORMAT

1.24HOURS

2.12HOURS

Select the time format.

(for 24-hour format)

(for 12-hour format) default

The date and time currently set are displayed on the bottom row.

When “24-hour” is selected:

SET DATE & TIME

MD-DD-YYYY WWW

XX-XX-XXXX XXX

(Allows 00 to 23 as the hour value.)

When “12-hour” is selected:

SET DATE & TIME

MD-DD-YYYY WWW

XX-XX-XXXX XXX

(Allows 01 to 12 as the hour value and designates AM or PM.)

Move the cursor to the desired position using the following keys.

or

Enter the date.

Change the day-of-week desig- nation by pressing the following keys.

or

When the correct date is en- tered, press:

SET DATE & TIME

HH:MM

Move the cursor to the desired position using the following keys.

or

Enter the time.

When “12-hour” is selected, change the AM/PM designation by pressing the following keys,

or

When the correct time is en- tered, press:

SET DATE MODE 2.DD-MM-YYYY 3.YYYY-MM-DD

4.MM-DD-YY

5.DD-MM-YY 6.YY-MM-DD

40