Husqvarna CTH2542 XP Maintenance, General Recommendations, Lubrication Chart, Before Each USE

Replace Spark Plug

Replace Air Filter Paper Cartridge

Replace Fuel Filter

1 - Change more often when operating under a heavy load or in high ambient temperatures.

2 - Service more often when operating in dirty or dusty conditions.

Change Engine Oil (without oil filter)

Check Operator Presence & ROS Systems

EACH

USE

BEFORE

Clean Air Filter

Clean Air Screen

Inspect Muffler/Spark Arrester

Replace Oil Filter (If equipped)

Clean Engine Cooling Fins

E

N

G

I

N

E

T

R

A Check for Loose Fasteners C Check/Replace Mower Blades T Lubrication Chart

0 Check Battery Level

R Clean Battery and Terminals

Check Transaxle Cooling

Check Mower Levelness

Check V-Belts

Check Engine Oil Level

Change Engine Oil (with oil filter)

Check Tire Pressure

Check Brake Operation

MAINTENANCE

SCHEDULE

MAINTENANCE

EVERY	EVERY	EVERY	EVERY	EVERY	BEFORE
8	25	50	100	SEASON	STORAGE
HOURS	HOURS	HOURS	HOURS

3

4

1,2

1,2

2

2

1, 2

2

2

3 - Replace blades more often when mowing in sandy soil. 4 - Not required if equipped with maintenance-free battery.

maint_sch-tractore.ROS.e

GENERAL RECOMMENDATIONS		LUBRICATION CHART
The warranty on this tractor does not cover items that have		➀ SPINDLE ZERK	➀ SPINDLE ZERK
been subjected to operator abuse or negligence. To receive
full value from the warranty, operator must maintain tractor		➀ FRONT WHEEL	➀ FRONT WHEEL
as instructed in this manual.
Some adjustments will need to be made periodically to		BEARING ZERK	BEARING ZERK
properly maintain your tractor.		➀ STEERING	➁ ENGINE
At least once a season, check to see if you should make
any of the adjustments described in the Service and		SECTOR GEAR
		TEETH
Adjustments section of this manual.
•	At least once a year you should replace the spark plug,
	clean or replace air filter, and check blades and belts
	for wear. A new spark plug and clean air filter assure
	proper air-fuel mixture and help your engine run better
	and last longer.
BEFORE EACH USE		➀ General Purpose Grease
• Check engine oil level.
		➁ Refer to Maintenance “ENGINE” Section
•	Check brake operation.
•	Check tire pressure.	IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS
• Check operator presence and		WHICH HAVE SPECIAL NYLON BEARINGS. VISCOUS
		LUBRICANTS WILL ATTRACT DUST AND DIRT THAT WILL
	ROS systems for proper operation.
		SHORTEN THE LIFE OF THE SELF-LUBRICATING BEARINGS.
• Check for loose fasteners.		IF YOU FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY,
		POWDERED GRAPHITE TYPE LUBRICANT SPARINGLY.

19