Husqvarna CTH2542 XP Safety Rules, Safe Operation Practices for Ride-On Mowers, General Operation

Page 2

SAFETY RULES

Safe Operation Practices for Ride-On Mowers

DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

WARNING: In order to prevent ac- cidental starting when setting up, transporting, adjusting or making re- pairs, always disconnect spark plug wire and place wire where it cannot contact spark plug.

WARNING: Do not coast down a hill in neutral, you may lose control of the tractor.

WARNING: Tow only the attachments that are recommended by and com- ply with specifications of the manu- facturer of your tractor. Use common sense when towing. Operate only at the lowest possible speed when on a slope. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

I. GENERAL OPERATION

•Read, understand, and follow all instructions on the machine and in the manual before starting.

•Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times.

•Only allow responsible adults, who are familiar with the instructions, to operate the machine.

•Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blades.

•Be sure the area is clear of bystanders before operat- ing. Stop machine if anyone enters the area.

•Never carry passengers.

•Do not mow in reverse unless absolutely necessary. Always look down and behind before and while back- ing.

•Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Ma- terial may ricochet back toward the operator. Stop the blades when crossing gravel surfaces.

•Do not operate machine without the entire grass catcher, discharge guard, or other safety devices in place and working.

•Slow down before turning.

•Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting.

•Disengage blades when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge guard.

•Operate machine only in daylight or good artificial light.

•Do not operate the machine while under the infl uence of alcohol or drugs.

•Watch for traffic when operating near or crossing road- ways.

•Use extra care when loading or unloading the machine into a trailer or truck.

•Always wear eye protection when operating ma- chine.

•Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-re- lated injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from serious injury.

•Follow the manufacturer's recommendation for wheel weights or counterweights.

•Keep machine free of grass , leaves or other debris build-up which can touch hot exhaust / engine parts and burn. Do not allow the mower deck to plow leaves or other debris which can cause build-up to occur. Clean any oil or fuel spillage before operating or storing the machine. Allow machine to cool before storage.

II. SLOPE OPERATION

Slopes are a major factor related to loss of control and tip-over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

•Mow up and down slopes, not across.

•Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

•Choose a low ground speed so that you will not have to stop or shift while on the slope.

•Do not mow on wet grass. Tires may lose traction. Always keep the machine in gear when going down slopes. Do not shift to neutral and coast downhill.

•Avoid starting, stopping, or turning on a slope. If the tires lose traction, disengage the blades and proceed slowly straight down the slope.

•Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause the machine to roll over.

•Use extra care while operating machine with grass catchers or other attachments; they can affect the stability of the machine. Do no use on steep slopes.

•Do not try to stabilize the machine by putting your foot on the ground.

•Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents CTH2542 XP General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIV. Towing ServiceIII. Children Table of Contents Seat Unassembled PartsSteering Wheel Key Slope SheetTo Remove Tractor from CAR- TON AssemblyTools Required for Assembly Before Removing Tractor from SkidTractor See Figs A-4D Install Seat See FigTo Install Bagger Components to Bagger Adjustment See To Assemble Bagger See Figs A-5CTo Assemble and Install Mulcher Plug See Fig Horizontal AdjustmentVertical Adjustment Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Operate Mower See Fig Reverse Operation System ROSSee Fig To Transport See Figs Service REMINDER/HOUR MeterTo Operate on Hills ADD Gasoline Before Starting the EngineCheck Engine OIL Level To Start Engine See FigMowing Tips Mulching Mowing TipsTo Convert Mower See To Dump Bagger SeeBagging See General Recommendations MaintenanceLubrication Chart Before Each USEStar Pattern Blade TractorBlade CARESee Figs.20-22 Check Operator Presence SystemEngine Cleaning To Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Check and Adjust Brake See Fig To Replace Mower Blade Drive Belt See FigFront Wheel TOE-IN/CAMBER Transmission REMOVAL/REPLACEMENTTo Adjust Steering Wheel Alignment To Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Carburetor Interlocks and RelaysFuel System StorageOther Engine OILTroubleshooting Points With attachment clutch Schematic TRACTOR- -MODEL NO. CTH2542XP 96061015900, Product no 61Electrical KEY Part Description Chassis and Enclosures Repair Parts Drive Repair Parts Steering Assembly 532 19 Steering Wheel Engine 532 17 Control Throt Seat Assembly 532 18 SeatDecals Wheels & TiresMower CRD SVCMower Lift Bagger Service Notes Service Notes Warranty Statement Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX532 40 37-50 Rev 04.25.06 VB/TR

CTH2542 XP specifications

The Husqvarna CTH2542 XP is a robust riding lawn mower designed to cater to the needs of homeowners with mid-sized lawns. This machine is engineered for precision, efficiency, and exceptional comfort, making lawn care a seamless task.

One of the standout features of the CTH2542 XP is its powerful 24-horsepower Kohler engine. This reliable engine delivers ample power to tackle tough grass and uneven terrain. Paired with hydrostatic transmission, the mower offers smooth acceleration and easy control, making it simple to navigate various yard conditions.

Equipped with a 42-inch cutting deck, the CTH2542 XP allows for efficient mowing across medium to large lawns. The deck is made from high-quality materials, ensuring durability and longevity. Its cutting height can be easily adjusted between different positions, allowing users to customize their lawn’s appearance as per their preference.

The mower is designed with user comfort in mind. It features an ergonomic seat with armrests, providing support during extended mowing sessions. The easy-to-reach controls facilitate effortless maneuvering, reducing fatigue while working. Moreover, the compact design of the CTH2542 XP allows it to fit through tight spaces, making it versatile for various yard layouts.

In terms of technology, the CTH2542 XP includes a variety of innovative features. The air induction mowing technology optimizes airflow within the deck, ensuring an even cut and eliminating clumping. Additionally, the mower is compatible with a range of accessories, allowing users to tailor their equipment for mulching, bagging, and other functions.

Another notable characteristic of the CTH2542 XP is its robust build quality. Constructed with a heavy-duty frame and components, it can withstand the rigors of lawn care, ensuring it remains a reliable companion for years.

Finally, Husqvarna’s commitment to environmental sustainability is reflected in the design of the CTH2542 XP. The machine is engineered for fuel efficiency, minimizing emissions while delivering excellent performance, making it a responsible choice for eco-conscious consumers.

In conclusion, the Husqvarna CTH2542 XP stands out due to its powerful engine, user-friendly features, and innovative technology. It is designed for homeowners who seek a balance between performance and ease of use, making lawn maintenance a more enjoyable endeavor. Whether mowing a large lawn or navigating tight spaces, the CTH2542 XP proves to be a versatile and reliable tool for maintaining a beautiful yard.
Top Page Image Contents