Husqvarna Essential Maintenance for EZ24T and EZ4824: V-Belts and Deck Belt Replacement Guide
Page 38

MAINTENANCE

V-belts

Check every 100 hours of operation. Check for severe cracking and large nicks.

NOTE: The belt will show some small cracks in normal operation.

The belts are not adjustable. Replace belts if they begin to slip from wear.

Deck Belt Removal

1.Park on a level surface. Apply parking brake.

2.Lower the deck into the lowest cutting position.

3.Remove bolts from belt shields and remove shields.

4.Remove any dirt or grass that may have accumulated around the cutter housings and entire deck surface.

5.Remove tension on the belt by moving the idler arm.

6.Carefully slip belt up over the top of the cutter housing pulleys and remove belt. Rolling belt over the pulleys may damage the belt.

8058-131

Remove belt shields

Deck Belt Installation

 

 

NOTE: For ease in installing the deck belt, refer to

1

 

the routing decal on the top of the deck.

 

1.

Wrap the deck belt around the electric clutch

 

 

pulley that is located on the engine shaft.

 

2.

Route the belt forward and up onto the deck.

2

3.

Place belt around spring loaded idler pulley.

 

4.

Wrap the belt around the stationary idler pulley

 

 

and around the mandrel housings.

 

5.

Push inward on the idler arm and carefully route

 

 

belt over stationary idler pulley. Once belt is

 

 

properly routed, slowly release idler arm to tension

 

 

belt.

 

6.

Double check belt routing to make sure it matches

8061-034

 

the routing decal, and the belt does not have any

 

1. Clutch pulley position

 

twist. Correct as needed.

2. Deck belt

7.

Replace belt shields on both mandrel housings

Belt routing, deck belt

 

and secure with fasteners.

 

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Operator Manual All rights reserved Contents Page Introduction Good Service Manufacturing NumberSymbols and Decals Xxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxxSymbols and Decals Safety Safety InstructionsNever take passengers Slope Operation Personal Safety EquipmentAt hand when using the machine Be extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Risk of sparking Transport Spark ArrestorControls Control LocationsSteering Control Levers Throttle Control Blade SwitchParking Brake Fuses Ignition SwitchChoke Control Fuel Tank Fuel Shut Off Valve Cutting Height AdjusterSeat Adjustment Lever Always raise the deck to the highest position for transportBypass Linkages Hour MeterTracking Knob Steering OperationTraining Before Starting Starting the EnginePlace controls in neutral position Press in and turn the ignition key to the start position To remove cables, reverse order Weak BatteryJumper Cables Running Operating On Hills Mowing Tips Stopping the Engine Moving Machine by Hand ZT-2800 Bypass LinkagesMaintenance interval MaintenanceMaintenance Schedule Daily Least Hours Once Before AfterMaintenance Daily Once Hours Each Before After 100 300Battery Replacing batterySafety System Tire PressuresBelts Deck Belt RemovalBelt installation Pump Belt Replacing pump beltBlade replacement Cutting BladesAdjusting the Mower Deck Leveling deckAnti-Scalp Rollers Caster WheelsHardware Cleaning Use protective glasses when cleaning and washingLubrication GeneralDeck Spindle Front Wheel MountFront Wheel Bearings Deck Outer SpindleTransaxle Transmission Fluid Change Troubleshooting Problem CauseTroubleshooting Winter Storage ServiceStorage Schematics Accessories Technical DataTorque Specifications Standard HardwareEZ4824 EZ24T \ EZ4824CA Engine TransmissionDimension EZ4824 EZ24T \ EZ4824CA FrameConformity Certificates USA requirementsDelivery Service Action Date, mtr reading, stamp, signHour Service After the first 5-8 hoursService Journal At Least Once Each Year Page 115 384627 RevC 2011-10-06

EZ4824 CA/ 966659501, EZ24T/ 966659601, EZ4824/ 966612901 specifications

The Husqvarna EZ24T (model 966659601), EZ4824 CA (model 966659501), and EZ4824 (model 966612901) are part of the innovative EZ range of zero-turn mowers designed for superior performance and ease of use. These models combine advanced technology, robust features, and ergonomic design, making them excellent choices for both residential and commercial lawn care.

One of the standout features of the Husqvarna EZ24T is its powerful engine, delivering high performance for efficient grass cutting. It's equipped with a reliable 24 HP engine, providing ample power for tackling thick grass and uneven terrain. This engine, paired with a large cutting deck, ensures that users can complete their mowing tasks more quickly and effectively.

The EZ4824 CA and EZ4824 offer similar power with their 48-inch cutting decks that provide excellent maneuverability, making it easy to navigate around flower beds, trees, and other obstacles. The decks are designed for superior airflow and grass clipping discharge, promoting a healthier lawn by ensuring even and clean cuts. The height adjustment feature allows operators to customize cutting heights easily, accommodating various grass types and weather conditions.

These models also incorporate advanced hydrostatic transmission, granting users smooth and responsive handling. The zero-turn capability enables users to make tight turns, enhancing efficiency, especially in residential settings with complex landscapes. The EZ range is built to offer comfort, featuring an adjustable padded seat and ergonomic armrests to reduce fatigue during extended mowing sessions.

Durability is a hallmark of the Husqvarna EZ series, with heavy-duty steel frames and reinforced cutting decks that withstand the rigors of continuous use. The user-friendly controls make operation intuitive, allowing both novices and experienced users to harness the full potential of these machines. Additionally, maintenance is simplified with easy access to critical components, ensuring that owners can keep their mowers in top condition.

Safety features are integrated into the design, including an automatic shut-off system that engages when the operator leaves the seat, significantly reducing the risk of accidents. With these models, Husqvarna further emphasizes its commitment to innovation, user satisfaction, and environmental stewardship, making them a sound investment for anyone looking to achieve a well-maintained lawn. In summary, the Husqvarna EZ24T, EZ4824 CA, and EZ4824 offer a unique blend of power, precision, and comfort, solidifying their place in the market for top-tier lawn care solutions.
Top Page Image Contents