Husqvarna EZ4824/ 966612901, EZ24T/ 966659601 warranty Caster Wheels, Hardware, Anti-Scalp Rollers

Page 42

MAINTENANCE

Anti-Scalp Rollers

Anti-scalp rollers are properly adjusted when they are just slightly off of the ground when the deck is at the desired cutting height in the operating position. Anti- scalp rollers then keep the deck in the proper position to help prevent scalping in most terrain conditions.

IMPORTANT INFORMATION

Adjust anti-scalp rollers with the mower on a flat level surface.

The anti-scalp rollers can be set in three positions:

•Upper position 1½ to 2½" (38 to 64 mm) grass

•Middle position 2½" to 4" (64 to 102 mm) grass

•Lower position 4" to 6" (102 to 128 mm) grass.

The rollers should be approximately ¼" (6.5 mm) from ground. Do not adjust the rollers to support the deck.

8050-830

Anti-scalp rollers

IMPORTANT INFORMATION

To avoid deck damage, the anti-scalp rollers must not be adjusted to support the deck.

Caster Wheels

Check every 200 hours. Check that wheels rotate freely. If wheels do not rotate freely take the unit to your dealer for service.

Foam filled tires or solid tires will void the warranty.

IMPORTANT INFORMATION

DO NOT add any type of tire liner or foam fill material to the tires. Excessive loads created by foam filled tires will cause premature failures.

Only use O.E.M. specified tires.

Removal and installation

1.Remove nut and caster bolt.

2.Pull the wheel out of the yoke and retain the spacer for reuse.

3.Install in reverse order.

4.Tighten caster bolt.

Hardware

Check daily. Inspect the entire machine for loose or missing hardware.

1

2

8011-619-4

1.Caster yoke

2.Caster long spacer Caster wheels

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Operator Manual All rights reserved Contents Page Introduction Good Service Manufacturing NumberSymbols and Decals Xxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxxSymbols and Decals Safety Safety InstructionsNever take passengers Personal Safety Equipment At hand when using the machineSlope Operation Be extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Risk of sparking Transport Spark ArrestorControls Control LocationsSteering Control Levers Blade Switch Parking BrakeThrottle Control Ignition Switch Choke ControlFuses Fuel Tank Fuel Shut Off Valve Cutting Height AdjusterSeat Adjustment Lever Always raise the deck to the highest position for transportHour Meter Tracking KnobBypass Linkages Operation TrainingSteering Before Starting Starting the EnginePlace controls in neutral position Press in and turn the ignition key to the start position Weak Battery Jumper CablesTo remove cables, reverse order Running Operating On Hills Mowing Tips Stopping the Engine Moving Machine by Hand ZT-2800 Bypass LinkagesMaintenance interval MaintenanceMaintenance Schedule Daily Least Hours Once Before AfterMaintenance Daily Once Hours Each Before After 100 300Battery Replacing batterySafety System Tire PressuresBelts Deck Belt RemovalBelt installation Pump Belt Replacing pump beltBlade replacement Cutting BladesAdjusting the Mower Deck Leveling deckCaster Wheels HardwareAnti-Scalp Rollers Cleaning Use protective glasses when cleaning and washingLubrication GeneralDeck Spindle Front Wheel MountFront Wheel Bearings Deck Outer SpindleTransaxle Transmission Fluid Change Troubleshooting Problem CauseTroubleshooting Service StorageWinter Storage Schematics Accessories Technical DataTorque Specifications Standard HardwareEZ4824 EZ24T \ EZ4824CA Engine TransmissionDimension EZ4824 EZ24T \ EZ4824CA FrameConformity Certificates USA requirementsDelivery Service Action Date, mtr reading, stamp, signHour Service After the first 5-8 hoursService Journal At Least Once Each Year Page 115 384627 RevC 2011-10-06

EZ4824 CA/ 966659501, EZ24T/ 966659601, EZ4824/ 966612901 specifications

The Husqvarna EZ24T (model 966659601), EZ4824 CA (model 966659501), and EZ4824 (model 966612901) are part of the innovative EZ range of zero-turn mowers designed for superior performance and ease of use. These models combine advanced technology, robust features, and ergonomic design, making them excellent choices for both residential and commercial lawn care.

One of the standout features of the Husqvarna EZ24T is its powerful engine, delivering high performance for efficient grass cutting. It's equipped with a reliable 24 HP engine, providing ample power for tackling thick grass and uneven terrain. This engine, paired with a large cutting deck, ensures that users can complete their mowing tasks more quickly and effectively.

The EZ4824 CA and EZ4824 offer similar power with their 48-inch cutting decks that provide excellent maneuverability, making it easy to navigate around flower beds, trees, and other obstacles. The decks are designed for superior airflow and grass clipping discharge, promoting a healthier lawn by ensuring even and clean cuts. The height adjustment feature allows operators to customize cutting heights easily, accommodating various grass types and weather conditions.

These models also incorporate advanced hydrostatic transmission, granting users smooth and responsive handling. The zero-turn capability enables users to make tight turns, enhancing efficiency, especially in residential settings with complex landscapes. The EZ range is built to offer comfort, featuring an adjustable padded seat and ergonomic armrests to reduce fatigue during extended mowing sessions.

Durability is a hallmark of the Husqvarna EZ series, with heavy-duty steel frames and reinforced cutting decks that withstand the rigors of continuous use. The user-friendly controls make operation intuitive, allowing both novices and experienced users to harness the full potential of these machines. Additionally, maintenance is simplified with easy access to critical components, ensuring that owners can keep their mowers in top condition.

Safety features are integrated into the design, including an automatic shut-off system that engages when the operator leaves the seat, significantly reducing the risk of accidents. With these models, Husqvarna further emphasizes its commitment to innovation, user satisfaction, and environmental stewardship, making them a sound investment for anyone looking to achieve a well-maintained lawn. In summary, the Husqvarna EZ24T, EZ4824 CA, and EZ4824 offer a unique blend of power, precision, and comfort, solidifying their place in the market for top-tier lawn care solutions.
Top Page Image Contents