Husqvarna EZ24T/ 966659601 warranty Weak Battery, Jumper Cables, To remove cables, reverse order

Page 28

OPERATION

Weak Battery

WARNING!

Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

IMPORTANT INFORMATION

Your mower is equipped with a 12-volt negative grounded system. The other vehicle must also be a 12-volt negative grounded system. Do not use your mower to start other vehicles.

If your battery is too weak to start the engine, it should be recharged. (See Battery in the Maintenance section.)

Jumper Cables

1.

Connect each end of the RED cable to the

 

 

POSITIVE (+) terminal on each battery, taking

 

 

care not to short against chassis.

 

2.

Connect one end of the BLACK cable to the

 

 

NEGATIVE (-) terminal of the fully charged battery.

8011-642

3.

Connect the other end of the BLACK cable to a

Jumper cable connection

 

good CHASSIS GROUND on the mower with the

 

 

discharged battery, away from the fuel tank and

 

 

battery.

 

To remove cables, reverse order

4.Remove BLACK cable first from chassis and then from the fully charged battery.

5.Remove RED cable last from both batteries.

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Operator Manual All rights reserved Contents Page Introduction Good Service Manufacturing NumberSymbols and Decals Xxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxxSymbols and Decals Safety Safety InstructionsNever take passengers At hand when using the machine Personal Safety EquipmentSlope Operation Be extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Risk of sparking Transport Spark ArrestorControls Control LocationsSteering Control Levers Parking Brake Blade SwitchThrottle Control Choke Control Ignition SwitchFuses Fuel Tank Cutting Height Adjuster Seat Adjustment LeverFuel Shut Off Valve Always raise the deck to the highest position for transportTracking Knob Hour MeterBypass Linkages Training OperationSteering Before Starting Starting the EnginePlace controls in neutral position Press in and turn the ignition key to the start position Jumper Cables Weak BatteryTo remove cables, reverse order Running Operating On Hills Mowing Tips Stopping the Engine Moving Machine by Hand ZT-2800 Bypass LinkagesMaintenance Maintenance ScheduleMaintenance interval Daily Least Hours Once Before AfterMaintenance Daily Once Hours Each Before After 100 300Battery Replacing batterySafety System Tire PressuresBelts Deck Belt RemovalBelt installation Pump Belt Replacing pump beltBlade replacement Cutting BladesAdjusting the Mower Deck Leveling deckHardware Caster WheelsAnti-Scalp Rollers Cleaning Use protective glasses when cleaning and washingLubrication GeneralFront Wheel Mount Front Wheel BearingsDeck Spindle Deck Outer SpindleTransaxle Transmission Fluid Change Troubleshooting Problem CauseTroubleshooting Storage ServiceWinter Storage Schematics Technical Data Torque SpecificationsAccessories Standard HardwareEZ4824 EZ24T \ EZ4824CA Engine TransmissionDimension EZ4824 EZ24T \ EZ4824CA FrameConformity Certificates USA requirementsDelivery Service Action Date, mtr reading, stamp, signHour Service After the first 5-8 hoursService Journal At Least Once Each Year Page 115 384627 RevC 2011-10-06

EZ4824 CA/ 966659501, EZ24T/ 966659601, EZ4824/ 966612901 specifications

The Husqvarna EZ24T (model 966659601), EZ4824 CA (model 966659501), and EZ4824 (model 966612901) are part of the innovative EZ range of zero-turn mowers designed for superior performance and ease of use. These models combine advanced technology, robust features, and ergonomic design, making them excellent choices for both residential and commercial lawn care.

One of the standout features of the Husqvarna EZ24T is its powerful engine, delivering high performance for efficient grass cutting. It's equipped with a reliable 24 HP engine, providing ample power for tackling thick grass and uneven terrain. This engine, paired with a large cutting deck, ensures that users can complete their mowing tasks more quickly and effectively.

The EZ4824 CA and EZ4824 offer similar power with their 48-inch cutting decks that provide excellent maneuverability, making it easy to navigate around flower beds, trees, and other obstacles. The decks are designed for superior airflow and grass clipping discharge, promoting a healthier lawn by ensuring even and clean cuts. The height adjustment feature allows operators to customize cutting heights easily, accommodating various grass types and weather conditions.

These models also incorporate advanced hydrostatic transmission, granting users smooth and responsive handling. The zero-turn capability enables users to make tight turns, enhancing efficiency, especially in residential settings with complex landscapes. The EZ range is built to offer comfort, featuring an adjustable padded seat and ergonomic armrests to reduce fatigue during extended mowing sessions.

Durability is a hallmark of the Husqvarna EZ series, with heavy-duty steel frames and reinforced cutting decks that withstand the rigors of continuous use. The user-friendly controls make operation intuitive, allowing both novices and experienced users to harness the full potential of these machines. Additionally, maintenance is simplified with easy access to critical components, ensuring that owners can keep their mowers in top condition.

Safety features are integrated into the design, including an automatic shut-off system that engages when the operator leaves the seat, significantly reducing the risk of accidents. With these models, Husqvarna further emphasizes its commitment to innovation, user satisfaction, and environmental stewardship, making them a sound investment for anyone looking to achieve a well-maintained lawn. In summary, the Husqvarna EZ24T, EZ4824 CA, and EZ4824 offer a unique blend of power, precision, and comfort, solidifying their place in the market for top-tier lawn care solutions.
Top Page Image Contents