Husqvarna DRT70 owner manual Adjust Wheels for Cultivating See Figs

Page 11

OPERATION

•Do not lean on handle. This takes weight off the wheels and reduces traction. To get through a really tough section of sod or hard ground, apply upward pressure on handle or lower the depth stake.

ADJUST WHEELS FOR CULTIVATING (See Figs. 17 and 18)

• Place blocks under right hand side of tiller and remove

hairpin clip and clevis pin from right hand wheel.

• Move wheel outward approximately 1 inch until hole in

inner wheel hub lines up with inner hole in axle.

• Replace clevis pin and hairpin clip on inside of wheel

and remove blocks.

4

5

3

6

2

1

7

• Repeat preceding steps on left hand side.

NOTE: In extremely rough conditions and while cultivating, the wheels should be moved outward on the axle for increased stability.

OUTER VIEW OF TIRE

CLEVIS

PIN

FIG. 15

CULTIVATING

Cultivating is destroying the weeds between rows to pre- vent them from robbing nourishment and moisture from the plants. At the same time, breaking up the upper layer of soil crust will help retain moisture in the soil. Best digging depth is 1" to 3" (2.5-7.5 cm). Lower the outer side shields to protect small plants from being buried.

•Cultivate up and down the rows at a speed which will allow tines to uproot weeds and leave the ground in rough condition, promoting no further growth of weeds and grass (See Fig. 16).

•Do not lean on handle, this takes weight off the wheels, reduces traction, and may cause the tiller to skip over the ground.

•Always lower the drag stake when using the forward rotating tine drive.

FIG. 16

HAIRPIN

CLIP

tire_1

FIG. 17

INNER VIEW OF TIRE

CLEVIS

PIN

HAIRPIN

CLIP

tire_2

FIG. 18

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents DRT70 Preparation Safety RulesMaintenance and Storage TrainingTable of Contents OPERATOR’S Position See Fig AssemblyTools Required for Assembly Unpacking Carton See Fig Install Handle See Figs , 4,Check Tire Pressure Attach Clutch Cable See FigConnect Shift ROD See Fig Remove Tiller from CrateKnow Your Tiller Meets Ansi Safety RequirementsOperation Reverse Wheels ONLY/TINES Stopped HOW to USE Your TillerTine Operation with Wheel Drive Forward Wheels ONLY/TINES StoppedBefore Starting Engine TurningCultivating To TransportTilling Hints See Fig ADD GasolineTo Start Engine See Fig Adjust Wheels for Cultivating See Figs General Recommendations MaintenanceMaintenance Schedule Lubrication ChartAIR Filter See Fig EngineSpark Plug CleaningCooling System See Fig MufflerTire Care Service and AdjustmentsTiller To Replace Ground Drive Belt See Figs Ground Drive Belt Adjustment See FigTine Replacement See Figs , 28 To Adjust Carburetor To Adjust Throttle Control Cable See FigEngine OIL StorageOther Fuel SystemTroubleshooting Points Handle Assembly Repair PartsKEY Part Description MAINFRAME, Left SideMAINFRAME, Right Side Transmission7 Tine Shield Tine Assembly Decals 532 41 17-80 Rev 1 01.03.08 TH

DRT70 specifications

The Husqvarna DRT70 is a standout addition to Husqvarna's line of high-performance garden equipment, specifically designed for cultivating soil and preparing garden beds. This robust tiller is tailored for both professional landscapers and avid gardeners who seek efficiency and reliability in their gardening tools.

One of the main features of the Husqvarna DRT70 is its powerful 4-cycle engine, delivering ample torque and consistent performance, even in challenging soil conditions. This engine is designed for easy starting and requires less maintenance than its 2-cycle counterparts, making it an excellent choice for users looking for convenience alongside power.

The DRT70 boasts an impressive tilling width of 17 inches and a tilling depth of up to 8 inches. Such capabilities allow gardeners to efficiently break through tough soil layers, mixing in organic materials like compost or fertilizers with ease. This versatility makes the DRT70 suitable for a range of gardening tasks, from creating new garden beds to rejuvenating existing soil.

Equipped with a durable and adjustable handle, the Husqvarna DRT70 offers exceptional comfort and control during operation. The handle can be configured to suit individual user preferences, allowing for better posture and minimizing fatigue over extended use. This is particularly advantageous for professionals who may spend long hours tilling large plots.

One of the notable technologies integrated into the DRT70 is its counter-rotating tines. This feature enhances the tiller's soil cultivation capability, breaking up compacted soil more effectively while also reducing weed growth. The counter-rotation not only improves efficiency but also results in a more consistent tilling depth and texture.

Safety is paramount with the Husqvarna DRT70, which is equipped with a system that allows for easy operator control. The tiller features a safety guard and an easy-to-reach throttle, enabling users to maintain a safe distance from the tines while still having quick access to power settings.

In summary, the Husqvarna DRT70 is a powerful, user-friendly tiller that excels in soil cultivation. Its advanced features, including a robust engine, adjustable handle, and counter-rotating tines, make it an exceptional tool for anyone committed to gardening success. Whether tackling small home projects or larger landscaping endeavors, the DRT70 stands out as a reliable partner in achieving superior soil preparation.
Top Page Image Contents