Husqvarna DRT70 owner manual Turning, Cultivating, To Transport, Before Starting Engine

Page 9

OPERATION

DEPTH STAKE PIN “RELEASED” POSITION

“LOCKED”

POSITION

NUT “B”

OUTER

NUT “A”

ta

 

 

11

 

_

 

 

 

e

 

 

 

k

 

 

SIDE SHIELD

 

s

 

 

 

 

pt

 

 

 

 

 

_

 

 

 

 

 

h

 

 

 

 

 

de

 

 

 

FIG. 12

TURNING

•Release the drive control bar.

•Move throttle control to “SLOW” position.

•Place shift lever indicator in “F” (forward) position. Tines will not turn.

•Lift handle to raise tines out of ground.

•Swing the handle in the opposite direction you wish to turn, being careful to keep feet and legs away from tines.

•When you have completed your turn-around, release the drive control bar and lower handle. Place shift le- ver in (till) position and move throttle control to desired speed. To begin tilling, hold drive control bar against the handle.

CULTIVATING

•Use the forward rotating tine drive when cultivating, tilling soft ground or tilling pre-tilled soil.

•Release depth and drag stake pins. Lower drag stake. Pull the depth stake up for increased tilling depth. Place proper pin in hole of depth stake or drag stake to lock in position.

• Place shift lever indicator in ()till position.

• Hold the drive control bar against the handle to start tilling movement. Tines and wheels will both turn.

• Move throttle control "FAST" position for deep tilling. To cultivate, throttle control can be set at any desired speed, depending on how fast or slow you wish to cultivate.

• Always lower the drag stake when using the forward rotating tine drive.

OUTER SIDE SHIELDS (See Fig. 12)

The back edges of the outer side shields are slotted so that the shields can be raised for deep tilling and lowered for shallow tilling to protect small plants from being buried. Loosen nut “A” in slot and nut “B”. Move shield to desired position (both sides). Retighten nuts.

TO TRANSPORT

CAUTION: Beforeliftingortransporting, allow tiller engine and muffler to cool. Disconnect spark plug wire. Drain gasoline from fuel tank.

AROUND THE YARD

•Release the depth stake pin. Move the depth stake down to the top hole for transporting the tiller. Place depth stake pin in hole of depth stake to lock in posi- tion. This prevents tines from scuffing the ground.

•Place shift lever indicator in “F” (forward) position for transporting.

•Hold the drive control bar against the handle to start tiller movement. Tines will not turn.

•Move throttle control to desired speed.

AROUND TOWN

•Disconnect spark plug wire.

•Drain fuel tank.

•Transport in upright position to prevent oil leakage.

BEFORE STARTING ENGINE

IMPORTANT: BE VERY CAREFUL NOT TO ALLOW DIRT TO ENTER THE ENGINE WHEN CHECKING OR ADDING OIL OR FUEL. USE CLEAN OIL AND FUEL AND STORE IN APPROVED, CLEAN, COVERED CONTAINERS. USE CLEAN FILL FUNNELS.

CHECK ENGINE OIL LEVEL (See Fig. 13)

•The engine in your unit has been shipped, from the factory, already filled with SAE 30 summer weight oil.

•With engine level, clean area around oil filler plug and remove plug.

•Engine oil should be to point of overflowing when engine is level. For approximate capacity see “PRODUCT SPECIFICATIONS” on page 3 of this manual. All oil must meet A.P.I. Service Classification SG-SL.

•Reinstall engine oil cap and tighten.

•For cold weather operation you should change oil for easier starting (See oil viscosity chart in the Mainte- nance section of this manual).

•To change engine oil, see the Maintenance section in this manual.

OIL

LEVEL

FIG. 13

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents DRT70 Maintenance and Storage Safety RulesTraining PreparationTable of Contents Assembly Tools Required for AssemblyOPERATOR’S Position See Fig Unpacking Carton See Fig Install Handle See Figs , 4,Connect Shift ROD See Fig Attach Clutch Cable See FigRemove Tiller from Crate Check Tire PressureMeets Ansi Safety Requirements OperationKnow Your Tiller Tine Operation with Wheel Drive HOW to USE Your TillerForward Wheels ONLY/TINES Stopped Reverse Wheels ONLY/TINES StoppedCultivating TurningTo Transport Before Starting EngineADD Gasoline To Start Engine See FigTilling Hints See Fig Adjust Wheels for Cultivating See Figs Maintenance Schedule MaintenanceLubrication Chart General RecommendationsAIR Filter See Fig EngineCooling System See Fig CleaningMuffler Spark PlugService and Adjustments TillerTire Care To Replace Ground Drive Belt See Figs Ground Drive Belt Adjustment See FigTine Replacement See Figs , 28 To Adjust Carburetor To Adjust Throttle Control Cable See FigOther StorageFuel System Engine OILTroubleshooting Points Handle Assembly Repair PartsKEY Part Description MAINFRAME, Left SideMAINFRAME, Right Side Transmission7 Tine Shield Tine Assembly Decals 532 41 17-80 Rev 1 01.03.08 TH

DRT70 specifications

The Husqvarna DRT70 is a standout addition to Husqvarna's line of high-performance garden equipment, specifically designed for cultivating soil and preparing garden beds. This robust tiller is tailored for both professional landscapers and avid gardeners who seek efficiency and reliability in their gardening tools.

One of the main features of the Husqvarna DRT70 is its powerful 4-cycle engine, delivering ample torque and consistent performance, even in challenging soil conditions. This engine is designed for easy starting and requires less maintenance than its 2-cycle counterparts, making it an excellent choice for users looking for convenience alongside power.

The DRT70 boasts an impressive tilling width of 17 inches and a tilling depth of up to 8 inches. Such capabilities allow gardeners to efficiently break through tough soil layers, mixing in organic materials like compost or fertilizers with ease. This versatility makes the DRT70 suitable for a range of gardening tasks, from creating new garden beds to rejuvenating existing soil.

Equipped with a durable and adjustable handle, the Husqvarna DRT70 offers exceptional comfort and control during operation. The handle can be configured to suit individual user preferences, allowing for better posture and minimizing fatigue over extended use. This is particularly advantageous for professionals who may spend long hours tilling large plots.

One of the notable technologies integrated into the DRT70 is its counter-rotating tines. This feature enhances the tiller's soil cultivation capability, breaking up compacted soil more effectively while also reducing weed growth. The counter-rotation not only improves efficiency but also results in a more consistent tilling depth and texture.

Safety is paramount with the Husqvarna DRT70, which is equipped with a system that allows for easy operator control. The tiller features a safety guard and an easy-to-reach throttle, enabling users to maintain a safe distance from the tines while still having quick access to power settings.

In summary, the Husqvarna DRT70 is a powerful, user-friendly tiller that excels in soil cultivation. Its advanced features, including a robust engine, adjustable handle, and counter-rotating tines, make it an exceptional tool for anyone committed to gardening success. Whether tackling small home projects or larger landscaping endeavors, the DRT70 stands out as a reliable partner in achieving superior soil preparation.
Top Page Image Contents