Husqvarna DRT70 To Replace Ground Drive Belt See Figs, Ground Drive Belt Adjustment See Fig

Page 16

SERVICE AND ADJUSTMENTS

TO REPLACE GROUND DRIVE BELT (See Figs. 25 and 26)

Remove belt guard as described in “TO REMOVE BELT GUARD”.

Remove old belt by slipping off engine pulley first then remove from transmission pulley.

Place new belt in groove of transmission pulley and into engine pulley. BELT MUST BE IN GROOVE ON TOP OF IDLER PULLEY. NOTE POSITION OF BELT TO GUIDES.

Check belt adjustment as described below.

Replace belt guard.

Reposition wheel and replace clevis pin and hairpin clip.

GROUND DRIVE BELT ADJUSTMENT (See Fig. 26)

For proper belt tension, the extension spring should have about 5/8 inch (16 mm) stretch when drive control bar is in “ENGAGED” position. This tension can be attained as follows:

Loosen cable clip screw securing the drive control cable.

Slide cable forward for less tension and rearward for more tension until about 5/8 inch (16 mm) stretch is obtained while the drive control bar is engaged.

Tighten cable clip screw securely.

CABLE CLIP SCREW

ENGINE

PULLEYDRIVE CONTROL CABLE

LESS

TENSION

 

 

MORE

5/8"

 

TENSION

EXTENSION

IDLERSPRING

PULLEYTRANSMISSION

PULLEY

FIG. 26

16

Image 16
Contents DRT70 Safety Rules Maintenance and StorageTraining PreparationTable of Contents Tools Required for Assembly AssemblyOPERATOR’S Position See Fig Install Handle See Figs , 4, Unpacking Carton See FigAttach Clutch Cable See Fig Connect Shift ROD See FigRemove Tiller from Crate Check Tire PressureOperation Meets Ansi Safety RequirementsKnow Your Tiller HOW to USE Your Tiller Tine Operation with Wheel DriveForward Wheels ONLY/TINES Stopped Reverse Wheels ONLY/TINES StoppedTurning CultivatingTo Transport Before Starting EngineTo Start Engine See Fig ADD GasolineTilling Hints See Fig Adjust Wheels for Cultivating See Figs Maintenance Maintenance ScheduleLubrication Chart General RecommendationsEngine AIR Filter See FigCleaning Cooling System See FigMuffler Spark PlugTiller Service and AdjustmentsTire Care Ground Drive Belt Adjustment See Fig To Replace Ground Drive Belt See FigsTine Replacement See Figs , 28 To Adjust Throttle Control Cable See Fig To Adjust CarburetorStorage OtherFuel System Engine OILTroubleshooting Points Repair Parts Handle AssemblyMAINFRAME, Left Side KEY Part DescriptionMAINFRAME, Right Side Transmission7 Tine Shield Tine Assembly Decals 532 41 17-80 Rev 1 01.03.08 TH

DRT70 specifications

The Husqvarna DRT70 is a standout addition to Husqvarna's line of high-performance garden equipment, specifically designed for cultivating soil and preparing garden beds. This robust tiller is tailored for both professional landscapers and avid gardeners who seek efficiency and reliability in their gardening tools.

One of the main features of the Husqvarna DRT70 is its powerful 4-cycle engine, delivering ample torque and consistent performance, even in challenging soil conditions. This engine is designed for easy starting and requires less maintenance than its 2-cycle counterparts, making it an excellent choice for users looking for convenience alongside power.

The DRT70 boasts an impressive tilling width of 17 inches and a tilling depth of up to 8 inches. Such capabilities allow gardeners to efficiently break through tough soil layers, mixing in organic materials like compost or fertilizers with ease. This versatility makes the DRT70 suitable for a range of gardening tasks, from creating new garden beds to rejuvenating existing soil.

Equipped with a durable and adjustable handle, the Husqvarna DRT70 offers exceptional comfort and control during operation. The handle can be configured to suit individual user preferences, allowing for better posture and minimizing fatigue over extended use. This is particularly advantageous for professionals who may spend long hours tilling large plots.

One of the notable technologies integrated into the DRT70 is its counter-rotating tines. This feature enhances the tiller's soil cultivation capability, breaking up compacted soil more effectively while also reducing weed growth. The counter-rotation not only improves efficiency but also results in a more consistent tilling depth and texture.

Safety is paramount with the Husqvarna DRT70, which is equipped with a system that allows for easy operator control. The tiller features a safety guard and an easy-to-reach throttle, enabling users to maintain a safe distance from the tines while still having quick access to power settings.

In summary, the Husqvarna DRT70 is a powerful, user-friendly tiller that excels in soil cultivation. Its advanced features, including a robust engine, adjustable handle, and counter-rotating tines, make it an exceptional tool for anyone committed to gardening success. Whether tackling small home projects or larger landscaping endeavors, the DRT70 stands out as a reliable partner in achieving superior soil preparation.