Husqvarna CTH2542T manual Table of Contents

Page 4

PRODUCT SPECIFICATIONS

Gasoline Capacity

2.5 Gallons (9,5 L)

and type:

Unleaded Regular

Oil Type (API-SG-SL):

SAE 10W30 (above 32°F/0°C)

 

SAE 5W-30 (below 32°F/0°C)

Oil Capacity:

W/ Filter:

64 oz. (1,9 L)

 

 

Spark Plug:

Champion RC12YC

 

(Gap: .030")

Ground Speed (MPH):

Forward: 0 – 5.2

 

Reverse:

0 – 2.9

Charging System:

15 AMPS @ 3600 RPM

Battery:

AMP/HR:

28

 

MIN. CCA:

230

 

CASE SIZE: U1R

Blade Bolt Torque:

27-35 FT. LBS

 

 

 

CONGRATULATIONS on your purchase of a new tractor. It has been designed, engineered and manufactured to give you the best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center. We have competent, well-trained technicians and the proper tools to service or repair this tractor.

Please read and retain this manual. The instructions will enable you to assemble and maintain your tractor properly. Always observe the "SAFETY RULES".

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your tractor.

•Follow the instructions under the "Maintenance" and "Storage" sections of this manual.

WARNING: This tractor is equipped with an internal com- bustion engine and should not be used on or near any un- improved forest-covered, brush-covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.

TABLE OF CONTENTS

SAFETY RULES

2-3

PRODUCT SPECIFICATIONS

4

CUSTOMER RESPONSIBILITIES

4

ASSEMBLY

6-10

OPERATION

11-18

MAINTENANCE SCHEDULE

19

MAINTENANCE

19-22

SERVICE AND ADJUSTMENTS

23-27

STORAGE

28

TROUBLESHOOTING

29-30

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents CTH2542T Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationIII. Children ServiceIV. Towing Table of Contents Unassembled Parts Steering WheelAssembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidInstall Seat See Fig To Install Bagger Components to Tractor See Figs A-4DBagger Adjustment See Horizontal AdjustmentVertical Adjustment To Assemble Bagger See Figs A-5CTo Assemble and Install Mulcher Plug See Fig Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsChecklist Operation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig Using the Reverse Operation System See FigService REMINDER/HOUR Meter To Operate Mower See FigBefore Starting the Engine To Operate on HillsTo Transport See Figs Check Engine OIL LevelPurge Transmission To Start Engine See FigAutomatic Transmission Warm UP Mowing Tips Mulching Mowing TipsTo Convert Mower See To Dump Bagger SeeBagging See Maintenance Lubrication ChartTractor Blade CARESee Figs.20-22Star Pattern Blade Check Operator Presence SystemEngine Cleaning To Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsBelt Installation To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig Belt RemovalTo Check Brake To Adjust Steering Wheel AlignmentFront Wheel TOE-IN/CAMBER Transmission REMOVAL/REPLACEMENT To Adjust Throttle Control CableTo Adjust Carburetor To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points With attachment clutch Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX532 42 66-50 02.27.09 BAD
Top Page Image Contents