Husqvarna CG46A Customer Responsibilities, General Recommendations, Storage, Blade Care

Page 12

CUSTOMER RESPONSIBILITIES

GENERAL RECOMMENDATIONS

Always observe safety rules when performing any mainte- nance.

Before each use check for loose fasteners.

Clean unit thoroughly after each use.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

See BLADE CARE instructions in your tractor owner's manual.

CAUTION: BEFORE PERFORMING ANY MAINTENANCE , SERVICE OR ADJUST- MENTS:

Depress clutch brake pedal fully and set parking brake.

Place gearshift/motion control lever in "NEU- TRAL" position.

Place clutch control in "DISENGAGED" po- sition.

Turn ignition key to "OFF" position.

Make sure blades and all moving parts have completely stopped.

Disconnect spark plug wire(s) from spark plug(s) and place wire where it cannot come in contact with plug.

CAUTION: Grass catcher components are subject to wear, damage and deteriora- tion, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer's recommended parts, when necessary.

STORAGE

When grass catcher is to be stored for a period of time, clean it thoroughly, remove all dirt, grass, leaves, etc. Store in a clean, dry place.

CAUTION: Do not leave grass in bagger containers. Empty containers after each use and before storing. Failure to do so may result in spontaneous combustion which could develop into a fire.

TO REMOVE GRASS CATCHER

Reverse appropriate steps in ASSEMBLY section of this manual.

12

Image 12
Contents Model No. CG46A Inch Mower Grass Catcher Safety Rules Safe Operation Practices for Ride-On MowersTable of Contents Carton Contents BAG of Parts ContentsUnpacking Instructions BAG of Parts Contents Assembly Parts IdentificationThese are the Tools YOU will Need to Assemble Your Grass CatcherRear Mounting Bracket Support Plate See FigsUse Hardware - Group a Cover Seal See FigContainer Assembly See Fig Mounting to Tractor See FigUse Hardware - Group C Container Mounting See Fig Lower Chute See Use Hardware - Group DChute Latch Assembly See FigUse Hardware - Group E & F Upper Chute See &12Operation Tips for Improved Bagging OperationCustomer Responsibilities General RecommendationsStorage Blade CareService Notes Repair PARTS/PIÈCES DE Rechange Product Number 954 04 00 06-07 / Numéro DE Produit 954 04KEY Part Description