Husqvarna C38D manual Drill 4 Hole Bolt Pattern, See Figs ,14

Page 14

PREPARATION

3

DRILL 4 HOLE BOLT PATTERN

 

 

(See Figs. 13,14 & 15)

On some model tractors, it may be necessary to drill new holes in drawbar for the mounting bracket. To determine if you need to drill holes in your drawbar, closely look at the illustration below.

2-3/4"

 

1-1/8"

 

 

 

2-1/4"

2"

3-3/8"

1-7/16"

FIG. 13

Your drawbar may or may not have some or all of the holes shown. For the assembly of your new grass catcher only the five holes dimensioned will be used. If your drawbar does not have the five holes in the correct positions continue with this section.

•Remove the drawbar by removing the two mounting bolts on each side. Keep hardware for remounting.

NOTE: If your tractor has a wire loop mounted to the drawbar, remove it at this time.

DRAWBAR

WIRE LOOP (Not on all models)

DRAWBAR MOUNTING BOLTS (both sides)

FIG. 14

•Place the drawbar in a vice or similar locking device.

•Cut out the 4 hole bolt pattern template from the back of this manual.

•Align top and right edge of template and drawbar.

•Tape in position.

•Mark and drill hole #1 only, using a 11/32" drill bit.

•Assemble mounting bracket to drilled hole in drawbar with one hex bolt and nut from hardware group "B".

NOTE: Mounting bracket must be assembled with lanced tabs to bottom as shown.

HEX BOLT

DRAWBAR

AND NUT

 

 

MOUNTING

 

BRACKET

WIRE LOOP MOUNTING HOLE (drill 9/32"

if necessary)

LANCED TABS

 

PARALLEL

 

TO BOTTOM

 

 

FIG. 15

•Align bracket so it is parallel with right edge of drawbar and tighten securely. Holes in bracket should line up with remaining holes in template.

•Using bracket as a template, drill remaining three (3) 11/ 32" mounting holes.

NOTE: If your tractor is equipped with a wire loop, drill new mounting hole as shown, if necessary.

•For ease of assembly mounting bracket should be assembled at this time (refer to "REAR MOUNTING BRACKET" in ASSEMBLY section of this manual).

•Remount drawbar to tractor using hardware previously removed.

NOTE: Failure to reconnect the wire loop connection will result in not being able to start tractor.

PROCEED WITH ASSEMBLY INSTRUC- TIONS IN THE FRONT OF THIS MANUAL

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Rvice Safety Rules Safe Operation Practices for Ride-On MowersTable of Contents Know Your Grass Catcher BAG of Parts Contents Assembly Parts IdentificationRear Mounting Bracket Use Hardware - Group C Container Assembly See FigSupport Post See Fig Mounting to Tractor See FigContainer Mounting See Fig No hardware required Chute Latch AssemblyLower Chute See Fig See Fig Use Hardware - Groups F & G10UPPER Chute See Figs a & 10B No hardware required 11LEVEL Mower Deck No hardware requiredOperation Tips for Improved Bagging OperationTo Remove Grass Catcher Customer ResponsibilitiesBlade Care See Fig PreparationTrim Deflector Shield Drill Hole in Deck BaffleDrill 4 Hole Bolt Pattern See Figs ,14Deflector Trim Template Mower Deck Baffle Drill Template TOP EdgePage USE 11/32 Drill BIT Page Page Repair PARTS/PIÈCES DE Rechange KEY Part

C38D specifications

The Husqvarna C38D is a versatile and efficient compact excavator that stands out in the construction and landscaping industries. Designed for various applications such as digging, grading, and demolition, the C38D combines power, agility, and user-friendly technology, making it a reliable choice for contractors and operators alike.

One of the main features of the Husqvarna C38D is its powerful hydrostatic drive system. This system allows for smooth and precise control of the machine’s movement, enhancing its maneuverability in tight spaces. The C38D is equipped with a robust engine that delivers impressive digging force and lifting capacity, enabling operators to tackle even the toughest jobs with ease.

The C38D's compact design is another notable characteristic. With a low overall height and narrow width, this excavator is ideal for urban environments and confined job sites. It can easily navigate through narrow gates or around obstacles, making it a practical option for landscaping and residential projects. Despite its compact size, the C38D does not compromise on performance, boasting a strong boom and arm arrangement that maximizes digging depth and reach.

In terms of technology, the Husqvarna C38D features an intuitive control system that enhances operator comfort and efficiency. The ergonomic operator's cabin provides excellent visibility and incorporates comfortable controls, reducing fatigue during long working hours. Additionally, the machine's advanced hydraulic system ensures optimal efficiency, allowing for quicker cycle times and improved fuel economy.

The C38D is also designed with durability in mind. Heavy-duty components and robust construction materials ensure that it remains operational in demanding conditions. Maintenance is simplified through easily accessible service points, allowing operators to keep the machine in peak condition with minimal downtime.

In conclusion, the Husqvarna C38D is a powerful and compact excavator that offers exceptional performance and usability. With its hydrostatic drive, advanced hydraulic system, and ergonomic design, it is well-suited for a range of applications. Whether digging, grading, or performing demolition tasks, operators can rely on the C38D to deliver results while maintaining comfort and control. This excavator exemplifies Husqvarna’s commitment to quality and innovation in the construction equipment industry.
Top Page Image Contents