Husqvarna C38D manual Rear Mounting Bracket

Page 7

ASSEMBLY

1

MOWER DECK BAFFLE (See Fig. 1)

Use Hardware - - GROUP "A"

•Raise your tractor mower deck to its highest position.

•Install the hex bolt, and locknut through mower deck baffle and tighten securely.

HEX BOLT

UPPER CORNER RIBS

SELF

TAPPING

SHOULDER

BOLTS

UPPER CORNER RIBS

LOCKNUT

MOWER DECK BAFFLE

FIG. 1

2 REAR MOUNTING BRACKET

(See Figs. 2A, 2B & 2C)

NOTE: If your tractor already has four (4) shoulder bolts installed on the rear drawbar, simply hang the mounting bracket, lanced tabs towards bottom, on the bolts. Discard hardware group "B" and disregard the remaining Step 2 instructions.

SHOULDER

BOLTS

LANCED TABS

TOWARD BOTTOM

FIG. 2A

If your tractor does not have four (4) shoulder bolts installed on the drawbar, follow the instructions below.

Use Hardware - - GROUP "B"

Only one set of hardware in GROUP "B" will be used to mount the rear mounting bracket. To determine which set is correct for your tractor, check to see if there are (2) two upper corner ribs on each side of drawbar. If your tractor has the upper corner ribs, use the (4) four self tapping shoulder bolts. If your tractor does not have the corner ribs, use the set of (4) four bolts and locknuts.

SELF TAPPING SHOULDER BOLTS (See Fig. 2B)

•Using the four formed holes in the drawbar, install the four shoulder bolts as shown and tighten securely.

•Hang the mounting bracket, lanced tabs towards bottom, on the bolts.

LANCED TABS

TOWARD BOTTOM

FIG. 2B

BOLTS AND LOCKNUTS (See Fig. 2C)

IMPORTANT: O N T R A C T O R S W I T H F U E L T A N K UNDER THE SEAT, THE DRAWBAR MUST BE REMOVED FOR INSTALLATION OF MOUNTING BRACKET. TO REMOVE DRAWBAR, REMOVE TWO HEX BOLTS ON BOTH SIDES OF DRAWBAR.

•Assemble the mounting bracket, lanced tabs towards bottom, using the four smaller inside holes on the drawbar.

NOTE: If your tractor drawbar does not have the four correct holes for mounting the bracket, refer to the PREPARATION section of this manual.

•Install the four bolts and locknuts as shown and tighten securely.

•If drawbar was removed from tractor, reassemble to tractor at this time. Tighten securely.

BOLTS

LOCKNUTS

DRAWBAR MOUNTING BOLTS (BOTH SIDES)

 

LANCED TABS TOWARD BOTTOM

 

FIG. 2C

3

COVER SEAL (See Fig. 3)

No hardware required

•Align mark on seal with mark at cover opening.

•Work seal into opening so cover sits between flanges of seal.

ALIGNMENT

MARKS

COVER SEAL

7

FIG. 3

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Rvice Safe Operation Practices for Ride-On Mowers Safety RulesTable of Contents Know Your Grass Catcher BAG of Parts Contents Parts Identification AssemblyRear Mounting Bracket Mounting to Tractor See Fig Container Assembly See FigSupport Post See Fig Use Hardware - Group CSee Fig Use Hardware - Groups F & G Chute Latch AssemblyLower Chute See Fig Container Mounting See Fig No hardware required11LEVEL Mower Deck No hardware required 10UPPER Chute See Figs a & 10B No hardware requiredTips for Improved Bagging Operation OperationBlade Care Customer ResponsibilitiesTo Remove Grass Catcher Drill Hole in Deck Baffle PreparationTrim Deflector Shield See FigSee Figs ,14 Drill 4 Hole Bolt PatternMower Deck Baffle Drill Template TOP Edge Deflector Trim TemplatePage USE 11/32 Drill BIT Page Page Repair PARTS/PIÈCES DE Rechange KEY Part

C38D specifications

The Husqvarna C38D is a versatile and efficient compact excavator that stands out in the construction and landscaping industries. Designed for various applications such as digging, grading, and demolition, the C38D combines power, agility, and user-friendly technology, making it a reliable choice for contractors and operators alike.

One of the main features of the Husqvarna C38D is its powerful hydrostatic drive system. This system allows for smooth and precise control of the machine’s movement, enhancing its maneuverability in tight spaces. The C38D is equipped with a robust engine that delivers impressive digging force and lifting capacity, enabling operators to tackle even the toughest jobs with ease.

The C38D's compact design is another notable characteristic. With a low overall height and narrow width, this excavator is ideal for urban environments and confined job sites. It can easily navigate through narrow gates or around obstacles, making it a practical option for landscaping and residential projects. Despite its compact size, the C38D does not compromise on performance, boasting a strong boom and arm arrangement that maximizes digging depth and reach.

In terms of technology, the Husqvarna C38D features an intuitive control system that enhances operator comfort and efficiency. The ergonomic operator's cabin provides excellent visibility and incorporates comfortable controls, reducing fatigue during long working hours. Additionally, the machine's advanced hydraulic system ensures optimal efficiency, allowing for quicker cycle times and improved fuel economy.

The C38D is also designed with durability in mind. Heavy-duty components and robust construction materials ensure that it remains operational in demanding conditions. Maintenance is simplified through easily accessible service points, allowing operators to keep the machine in peak condition with minimal downtime.

In conclusion, the Husqvarna C38D is a powerful and compact excavator that offers exceptional performance and usability. With its hydrostatic drive, advanced hydraulic system, and ergonomic design, it is well-suited for a range of applications. Whether digging, grading, or performing demolition tasks, operators can rely on the C38D to deliver results while maintaining comfort and control. This excavator exemplifies Husqvarna’s commitment to quality and innovation in the construction equipment industry.
Top Page Image Contents