Husqvarna C38D manual Lower Chute See Fig, Container Mounting See Fig No hardware required

Page 9

ASSEMBLY

CONTAINER

BOTTOM

HALF

CONTAINER

TOP HALF

CONTAINER

BOTTOM HALF

PRESS TOGETHER TO FORM

SEAL WHILE LIFTING TOP HALF LOCKING TAB

ASSEMBLY CHECK: Squeeze sides of lower half of con- tainer and check that there is no gap between upper and lower halves. If a gap appears, unlock tabs to separate container halves and repeat instructions above.

WAR

NING

 

8

LOWER CHUTE (See Fig. 8)

Use Hardware - - GROUP "E"

•Raise and hold deflector shield in upright position.

•Slide back edge of chute over rear corner of mower deck and pivot forward.

•Align slot in lower chute with hex bolt in mower deck baffle and close chute over deck openning.

•Secure with washer and wing nut.

CAUTION: Do not remove discharge guard from mower. Raise and hold guard when attaching lower chute and allow it to rest on chute while in operation.

DEFLECTOR SHIELD

WASHER

MOWER DECK

BAFFLE

FIG. 6

7 CONTAINER MOUNTING (See Fig. 7)

No hardware required

•Install one container to left side first with warning to outside of unit. Install other container to right side.

NOTE: Right container should always overlap left container at center support.

•Close cover and lock latch handle over center support tube.

COVER LATCH

HANDLE

CONTAINER

WARNING

GN NI

R AW

ARNING

CONTAINER

HANDLE

CENTER

SUPPORT

TUBE

WING NUT

HEX BOLT

 

 

FIG. 8

9 CHUTE LATCH ASSEMBLY

(See Fig. 9)

Use Hardware - - GROUPS "F & G"

•Assemble latch pin to upper chute, as shown.

•Press weld nut into rubber latch and assemble rubber latch to lower chute, as shown.

•Tighten all hardware securely.

 

WASHERS

#10 x 1-1/8" SCREW

3/16 x 3/4 x 16 Ga.

SPLIT

SPACER

ACORN NUT

UPPER CHUTE

RUBBER

LATCH

WELD

#10 x 5/8"NUT SCREW

LOWER CHUTE

WASHER

LOCK WASHER

CONTAINER WARNING

3/16 x 3/4 x 16 Ga.

FIG. 7

9

FIG. 9

 

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Rvice Safe Operation Practices for Ride-On Mowers Safety RulesTable of Contents Know Your Grass Catcher BAG of Parts Contents Parts Identification AssemblyRear Mounting Bracket Support Post See Fig Container Assembly See FigUse Hardware - Group C Mounting to Tractor See FigLower Chute See Fig Chute Latch AssemblyContainer Mounting See Fig No hardware required See Fig Use Hardware - Groups F & G11LEVEL Mower Deck No hardware required 10UPPER Chute See Figs a & 10B No hardware requiredTips for Improved Bagging Operation OperationCustomer Responsibilities Blade CareTo Remove Grass Catcher Trim Deflector Shield PreparationSee Fig Drill Hole in Deck BaffleSee Figs ,14 Drill 4 Hole Bolt PatternMower Deck Baffle Drill Template TOP Edge Deflector Trim TemplatePage USE 11/32 Drill BIT Page Page Repair PARTS/PIÈCES DE Rechange KEY Part

C38D specifications

The Husqvarna C38D is a versatile and efficient compact excavator that stands out in the construction and landscaping industries. Designed for various applications such as digging, grading, and demolition, the C38D combines power, agility, and user-friendly technology, making it a reliable choice for contractors and operators alike.

One of the main features of the Husqvarna C38D is its powerful hydrostatic drive system. This system allows for smooth and precise control of the machine’s movement, enhancing its maneuverability in tight spaces. The C38D is equipped with a robust engine that delivers impressive digging force and lifting capacity, enabling operators to tackle even the toughest jobs with ease.

The C38D's compact design is another notable characteristic. With a low overall height and narrow width, this excavator is ideal for urban environments and confined job sites. It can easily navigate through narrow gates or around obstacles, making it a practical option for landscaping and residential projects. Despite its compact size, the C38D does not compromise on performance, boasting a strong boom and arm arrangement that maximizes digging depth and reach.

In terms of technology, the Husqvarna C38D features an intuitive control system that enhances operator comfort and efficiency. The ergonomic operator's cabin provides excellent visibility and incorporates comfortable controls, reducing fatigue during long working hours. Additionally, the machine's advanced hydraulic system ensures optimal efficiency, allowing for quicker cycle times and improved fuel economy.

The C38D is also designed with durability in mind. Heavy-duty components and robust construction materials ensure that it remains operational in demanding conditions. Maintenance is simplified through easily accessible service points, allowing operators to keep the machine in peak condition with minimal downtime.

In conclusion, the Husqvarna C38D is a powerful and compact excavator that offers exceptional performance and usability. With its hydrostatic drive, advanced hydraulic system, and ergonomic design, it is well-suited for a range of applications. Whether digging, grading, or performing demolition tasks, operators can rely on the C38D to deliver results while maintaining comfort and control. This excavator exemplifies Husqvarna’s commitment to quality and innovation in the construction equipment industry.
Top Page Image Contents