Husqvarna 3120XP manual Stopping

Page 21

STARTING AND STOPPING

Push in the choke control as soon as the engine ﬁres and keep pulling until the engine starts. When the engine starts, quickly apply full throttle; the throttle start lock will automatically disengage.

As the chain brake is still engaged the speed of the engine must be set to idling as soon as possible, this is achieved by quickly disengaging the throttle lock. This prevents unnecessary wear to the clutch, clutch drum and brake band.

Reactivate the chain brake by pushing the front hand guard back towards the front handle. The chain saw is now ready for use.

Stopping

Stop the engine by switching off the ignition. (Move the ignition switch to stop position.)

English – 21

Image 21

Contents 3120XP KEY to Symbols Symbols on the machineSymbols in the operator’s manual Contents Dear Customer IntroductionWhat is what on the chain saw? What is WHAT?General Safety Precautions Before using a new chain sawAlways use common sense Machine′s safety equipment Personal protective equipmentChain brake and front hand guard General Safety Precautions Chain catcher Throttle lockoutRight hand guard Vibration damping systemCutting equipment Stop switchMufﬂer General rulesSharpening your chain and adjusting depth gauge setting Increased if the depth gauge setting is Adjustment of depth gauge settingToo large Lubricating cutting equipment Tensioning the chainWhich could lead to serious, even fatal Chain oilChain drive sprocket Checking chain lubricationNeedle bearing lubrication Checking wear on cutting equipmentBar Assembly Fitting the bar and chainWorking with the chain Fuel Fuel HandlingFuel safety FuellingExtra chain oil Long-term storage Transport and storageStarting and stopping Starting and StoppingCold engine Warm engineStopping Working Techniques Basic safety rulesBefore use General working instructionsWorking Techniques Terms Basic cutting techniqueThere are ﬁve important factors you should consider LimbingTree felling technique Safe distanceFelling direction Felling cut Clearing the trunk and preparing your retreatFelling Training we advise you not to fell trees Your sawFreeing a tree that has fallen badly General adviceFreeing a trapped tree Cutting trees and branches that are in tensionHow to avoid kickback What is kickback?Cutting the trunk into logs Carburettor MaintenanceHigh speed jet H Correctly adjusted carburettorImmediately Checking the brake triggerMufﬂer StarterChanging a broken or worn starter cord Tensioning the recoil spring Changing a broken recoil springFitting the starter Spark plug Air ﬁlterLubricating the bar tip sprocket Must always be replacedAdjustment of the oil pump Needle bearing lubricationCooling system Daily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain ﬁling and ﬁle gauges Guide bar and saw chain combinationsApplies to Europe only EC-declaration of conformityEN ISO 121002010, ISO 149822009, EN ISO 0404/09/2119Original instructions 1153183-26

Related manuals

Manual 40 pages 34.12 Kb