Husqvarna 227LD, 225LD, 240L manual Symbol Explanation, Symbols, Max 10000 rpm

Page 2

SYMBOL EXPLANATION

Symbols

max 10000 rpm

WARNING! Clearing saws, brushcutters and trimmers can be dangerous!

Careless or incorrect use can result in serious or fatal injury to the operator or others.

Read through the Operator‘s Manual carefully and understand the content before using the machine.

Always use

A protective helmet where there is a risk of falling objects

Ear protection

Approved eye protection

Max. speed of output axle, rpm

Always wear approved protective gloves.

• Use anti-slip and stable boots.

• Only use non-metallic, flexible cutting elements, that is trimmer head with trimmer cord.

• Only intended for the trimmer head.

This product is in accordance with applicable CE directives.

Beware of thrown objects and ricochets.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

Checks and/or maintenance should be carried out with the engine switched off, with the stop switch in the STOP position.

15 m 50FT

15 m 50FT

The operator of the machine shall ensure, while working, that no persons or animals come closer than 15 metres.

Blade can thrust violently when coming in contact with any object. Blade thrust can cause amputation of arms or legs. Keep people and animals 50 feet away. Never use blades unless recommended handlebar, shoulder strap, attaching hardware and blade deflector are installed.

Arrows which show limits for handle mounting.

Always wear approved protective gloves.

Regular cleaning required.

Ocular control.

Approved eye protection must always be used.

2 – English

Image 2
Contents 225L/LD 227L/LD 232L 240L 101 89Max 10000 rpm Symbol ExplanationSymbols Contents Personal protective equipment Safety InstructionsMachine‘s safety equipment Cutting Equipment Vibration damping systemMuffler Locking nutMaintenance Cutting equipment Trimmer headStart General safety instructionsFuel safety Transport and storageGeneral working instructions Basic safety precautionsGrass trimming using the trimmer head Basic working techniquesSweeping ClearingTrimming What is WHAT? What is what on the trimmer?Assembly Assembly of the trimmer headDismantling Assembling other guards and cutting equipmentAssembling Fuelling Fuel HandlingFuel mixture Start and stop Start and StopControl before starting Maintenance CarburettorFinal setting of the idling speed T High speed needle H Correctly adjusted carburettorMuffler Cooling system Air filterAngle gear Spark plug Maintenance scheduleDaily maintenance Two-part shaftWeekly maintenance Monthly maintenanceTechnical Data Technical data 225L/LD 227L/LD 232L240L Technical dataApproved accessories EU declaration of conformity Only applies to Europe 1998W51