Husqvarna 288XP/XP lite manual Start and Stop, Cold engine, Warm engine

Page 28

START AND STOP

Start and stop

!WARNING!

•Never start the saw engine without the bar, chain and clutch cover (chain brake) assembled - or else the clutch can come loose and cause personal injuries.

•Always move the saw away from the fueling area before starting.

•Place the saw on clear ground and make sure that the chain is not contacting anything. Also, make sure that you have a secure footing.

•Keep people and animals well away from the working area.

Start

Grip the front handle with your left hand and hold the saw down by putting your right foot in the rear handle. Pull the starter handle with your right hand and pull out the starter cord slowly until the starter pawls engage. Then pull sharply.

Push in the choke control immediately when the engine ignites and make repeated

Cold engine

CHAIN BRAKE:

Disengage the chain brake by pulling the hand guard towards the front handle.

IGNITION:

Move the ignition switch to startposition.

CHOKE:

Pull out the choke knob.

FAST IDLE:

1.Push down the throttle trigger lockout (A).

2.Open the throttle fully (B). 3.Push the throttle latch

downwards (C).

The saw is fitted with a decompression valve (A): Press the valve to reduce the pressure in the cylinder and make starting easier. Always use the decompression valve when starting the saw. Once the saw has started the valve will automatically return to its original setting.

Warm engine

Use the same starting procedure as for a cold engine, but do not pull out the choke knob.

C

A

B

A

starting attemps. When the engine starts, rapidly give full throttle. Then the throttle latch will disengage.

CAUTION! Do not release the starter handle from fully pulled out position as this can cause damage on the saw.

Stop

The engine is stopped by switching off the ignition. (Move the ignition switch to stop position.)

28 – English

Page 27 Page 29
Image 28
Page 27 Page 29
Contents 288XP/XP Lite 101 90KEY to Symbols SymbolsContents Chain SAW Safety Equipment Safety InstructionsPersonal Protective Equipment Chain brake and front hand guard Chain catcher Throttle lockRight hand guard Vibration damping system Stop switchMuffler Checking brake band wear Checking the front hand guardChecking the automatic brake Checking the brake triggerThrottle lock Cutting Equipment 5 basic rulesCutting equipment designed to minimise kickback BarSaw chain Some terms that describe the bar and chainGeneral information on sharpening cutting teeth Sharpening your chain and adjusting raker clearanceSharpening cutting teeth Setting the raker clearance General advice on setting raker clearanceTensioning the chain Lubricating cutting equipment Chain oilFilling with chain oil Never use waste oilChecking chain lubrication Lubricating the clutch drum bearingChecking wear on cutting equipment Lubricating the bar tip sprocketHOW to Avoid Kickback What is kickback?Do not let go of the handles General rulesNever use the saw one- handed Min m General Safety Precautions10 ft Basic safety rules General Working InstructionsBasic cutting technique GeneralTerms CuttingTree felling technique Safe distanceLimbing Felling directionClearing the trunk and preparing your retreat FellingGeneral advice Freeing a tree that has fallen badly = high accident riskCutting the trunk into logs Freeing a Trapped treeWhat is WHAT? Assembly Mounting guide bar and chainFuel Handling FuelmixMin 3 m Fuelling10ft Start and Stop StartCold engine Warm engineMaintenance CarburetorStarter device assembly Starter deviceChanging a broken or worn starter cord Tensioning the recoil springAdjusting the oil pump Air filterSpark plug MufflerNeedle bearing maintenance Winter use Temperature 0oC 32oF or colderTemperature -5oC 23oF or colder Cooling systemWeekly maintenance Daily maintenance Monthly maintenanceTechnical Data Federal Emission Control Warranty Statement Your Warranty Rights Obligations1998W48

288XP/XP lite specifications

The Husqvarna 288XP and XP Lite chainsaws represent a pinnacle in forestry and tree care technology, designed for professionals who demand high performance and reliability in demanding environments. These models are renowned for their robust construction and impressive power-to-weight ratios, making them suitable for a variety of cutting tasks.

One of the standout features of the Husqvarna 288XP is its powerful engine. Equipped with a 75.6 cc two-stroke engine, it delivers a remarkable power output while maintaining efficiency. This ensures that the chainsaw can handle even the most challenging applications, from felling large trees to limbing and bucking with ease. The XP Lite version offers a slightly lighter design, making it more maneuverable while still delivering ample power for professional use.

The chainsaw also incorporates a high-performance air injection system. This unique technology helps to keep the air filter cleaner for longer periods by using centrifugal force to remove larger dust and debris particles before they reach the filter. As a result, users benefit from extended service intervals and less downtime for maintenance, which is crucial in professional settings.

Noise reduction is another important feature of the Husqvarna 288XP series. The saw is equipped with effective vibration damping, reducing fatigue during long operational hours. Additionally, it boasts advanced muffler technologies that help minimize noise levels, allowing operators to work in a variety of environments without disturbing the peace.

Ergonomics play a significant role in the design of these chainsaws. The adjustable chain oil flow ensures optimal lubrication, which improves cutting efficiency and prolongs the life of the chain and bar. The chainsaws also feature an ergonomic handle design, providing comfort and control during use, which is essential for precision cutting.

Safety is paramount in chainsaw design, and the Husqvarna 288XP includes several safety features, such as a chain brake, which activates in the event of kickback, protecting the operator from accidents. The tool-free chain tensioning system allows for quick adjustments on the job, further enhancing user safety and efficiency.

In summary, the Husqvarna 288XP and XP Lite chainsaws are engineered for the professional user who values performance, durability, and safety. With their powerful engines, innovative technologies, ergonomic designs, and commitment to user comfort and safety, these chainsaws are the ideal choice for those working in the most demanding forestry and tree care situations. Whether tackling large-scale projects or precision tasks, the Husqvarna 288XP series is built to meet and exceed expectations.
Top Page Image Contents