TECHNICAL SPECIFICATIONS
Engine
Model |
| Robin EX 27 |
|
|
|
|
|
Engine oil volume, | 1.0/1.0 |
| |
quarts/liters |
|
|
|
|
|
|
|
Gasoline tank | 1.6/6.1 |
| |
volume, gal/liters |
|
|
|
Type |
| Air cooled, | |
|
| overhead camshaft, gasoline engine | |
|
|
|
|
Air filter |
| Cyclonic type |
|
|
|
|
|
Oil system |
| Oil alert with auto shut down sensor | |
|
|
|
|
Muffler |
| Silent type 80 dbA, exhaust deflector, | |
|
| spark arrestor |
|
|
|
|
|
Emissions |
| Complies with EPA Phase 2 and CARB | |
|
| Tier II USA regulations |
|
Cooling |
| Air cooled with internal and external | |
|
| cooling fins |
|
|
|
|
|
Cylinder |
| Aluminum with cast iron liner |
|
|
|
|
|
Controls |
| Engine manual throttle, choke and fuel | |
|
| shut off levers, manual on/off switch | |
|
|
| |
Weight and Dimensions |
| ||
Weight – dry, lbs/kg |
|
| 260/118 |
|
|
| |
Weight with gasoline and oil full, lbs/kg | 272/124 | ||
|
|
| |
Length (handle folded in), inch/mm | 54/1372 | ||
|
|
|
|
Width, inch/mm |
|
| 23/584 |
|
|
|
|
Height, inch/mm |
|
| 39.5/1003 |
|
|
|
|
|
|
|
|
Blade |
|
|
|
Material cut |
| Green concrete only |
|
|
|
| |
Blade type |
| 10.0” (254 mm) or 9.0” (229 mm) dry cut | |
|
| with |
|
|
|
| |
Blade rotation |
| Counter clockwise, upcutting | |
|
|
|
|
Blade shaft speed, | 3200 |
rpm |
|
|
|
Cutting depth | 1 to 1 1/2 inch (25 to 38 mm) depending |
| on amount of blade wear |
Cutting distance | 3 1/2 / 89 |
from wall, inch/mm |
|
|
|
Average cutting rate - Estimate only. Speed will vary with job conditions and concrete mixes.
Soft aggregates, ft/min / m/min | 18/5.5 |
|
|
Medium aggregates, ft/min / m/min | 13/4.0 |
|
|
Hard aggregates, ft/min / m/min | 7/2.1 |
|
|
Blades are available in 10.0 inch (254 mm) and 9.0 inch (229 mm) diameters and in 0.100 inch (2.5 mm), 0.250 inch (6.4 mm), 0.380 inch (9.7 mm), and 0.500 inch (12.7 mm) widths.
Noise emissions (see note 1)
Sound power level, measured dB(A) | 101 |
|
|
Sound power level, guaranteed dB(A) | 102 |
|
|
Sound levels (see note 2) |
|
|
|
Sound pressure level at the operators ear, dB(A) | 87 |
|
|
Vibration levels, ahv (see note 3) |
|
Handle right, m/s2 | 3,0 |
|
|
Handle left, m/s2 | 3,2 |
|
|
Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC.
Note 2: Noise pressure level according to EN 13862. Reported data for noise pressure level has a typical statistical dispersion (standard deviation) of 1.0 dB(A).
Note 3: Vibration level according to EN 13862. Reported data for vibration level has a typical statistical dispersion (standard devia- tion) of 1 m/s2.
TECHNICAL DATA
CALIFORNIA AIR RESOURCES BOARD (CARB): This machine is considered a preempt
dards. Under construction equipment, and in particular, as a Saws : concrete, masonry, cutoff, with engine power less than 19KW (25hp), CARB standards do not apply to this machine.
For more information see the website | http://www.arb.ca.gov/msprog/offroad/preempt.htm |
EC DECLARATION OF CONFORMITY
Husqvarna AB,
•of May 17, 2006 ”relating to machinery” 2006/42/EC
•of December 15, 2004 ”relating to electromagnetic compatibility” 2004/108/EC.
•of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
The following standards have been applied: EN ISO 12100:2003, EN
Huskvarna December 29, 2009
Henric Andersson
Vice President, Head of Power Cutters and Construction Equipment
(Authorized representative for Husqvarna AB and responsible for technical documentation.)