Husqvarna 175 AWD manual Children, Maintenance

Page 10

SAFETY INSTRUCTIONS

•Do not try to stabilize the machine by putting your foot on the ground.

•When cleaning the chassis, the machine may never be driven near verges or ditches.

•Follow the manufacturer’s recommendations regarding wheel weights or counterbalance weights to increase machine stability.

IMPORTANT INFORMATION

Wheel weights fitted on the rear wheels are recommended when driving on slopes for safer steering and improved manoeuvrability. Consult your dealer concerning the use of wheel weights if you are unsure. Wheel weights can not be used on AWD-machines. Use counterweights.

Children

•Serious accidents may occur if you fail to be on your guard for children in the vicinity of the machine. Children are often attracted to the machine and mowing. Never assume that children will remain where you last saw them.

•Keep children away from the area to be mowed and under close supervision by another adult.

•Keep an eye out and shut off the machine if children enter the work area.

•Before and during reversing procedures, look behind you and down for small children.

•Never allow children to ride along. They can fall off and seriously injure themselves or be in the way for safe manoeuvring of the machine.

•Never allow children to operate the machine.

•Be particularly careful near corners, bushes, trees or other objects that block your view.

Maintenance

•Stop the engine. Prevent starting by removing the ignition cable from the spark plug or remove the ignition key before making any adjustments or carrying out maintenance.

•Never fill the fuel tank indoors.

•Petrol and petrol fumes are poisonous and extremely flammable. Be especially careful when handling petrol, as carelessness can result in personal injury or fire.

•Only store fuel in containers approved for the purpose.

•Never remove the fuel cap and fill the petrol tank while the engine is running.

•Allow the engine to cool before refuelling. Do not smoke. Do not fill petrol in the vicinity of sparks or naked flames.

•Handle oil, oil filters, fuel and the battery carefully, of environmental considerations. Follow the local recycling requirements.

•Electrical shocks can cause injuries. Do not touch cables when the engine is running. Do not test the ignition system with your fingers.

WARNING! The engine and the exhaust

!system become very hot during operation. Risk of burn injuries if touched.

•If leaks arise in the fuel system, the engine must not be started until the problem has been resolved.

•Store the machine and fuel in such a way that there is no risk that leaking fuel or fumes can cause any damage.

•Check the fuel level before each use and leave space for the fuel to expand, because the heat from the engine and the sun may otherwise cause the fuel to expand and overflow.

•Avoid overfilling. If you spill petrol on the machine, wipe up the spill and wait until it has evaporated before starting the engine. If you spill on your clothing, change your clothing.

•Allow the machine to cool before performing any actions in the engine compartment.

WARNING! The battery contains lead and

!lead pollutants, chemicals that are considered to cause cancer, birth defects or other reproductive impairment. Wash your hands after touching the battery.

10 – English

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Rider 175 Rider 175 AWD Contents Pre-delivery service Service journalAfter the first 8 hours Driving and transport on public roads IntroductionDear Customer TowingGood service Serial NumberKEY to Symbols SymbolsKEY to Symbols Insure your Rider Safety InstructionsSafety instructions General useDriving on slopes This is what you doMaintenance ChildrenTransport What is WHAT? Location of the controlsPresentation Seat Cutting height adjustment leverExercise care and refuel outdoors see safety instructions FuellingBefore starting DrivingStart the engine Driving the Rider Starting the engine with a weak batteryConnecting the jump leads Remove the cables in the reverse orderStop the engine Cutting tipsOther objects which can be thrown out by the blades Release lever Rider 175 AWD Release leverRelease lever Rider Maintenance Maintenance scheduleChecking and adjusting the steering wires CleaningRemoving of the machine hoods Checking and adjusting of throttle wire Adjusting the parking brake RiderAdjusting the parking brake Rider 175 AWD Can result in reduced braking abilityReplacing the air filter Replacement of fuel filterCool before starting to replace the air filter Ignition system Check the level of the battery acidChecking the fuel pump’s air filter Replacing the spark plugCheck the safety system Checking the tyre pressure When the engine is running. Mind your fingersMain fuse Checking the engine’s cooling air intakeRemoving the cutting unit Trapping your handChecking the cutting unit’s parallelism Adjusting the parallelism of the cutting unitReplacing the cutting unit belts Service position for the cutting unit Placing in the service positionChecking the blades Restoring from service positionRemoving the BioClip plug Changing the oil filter LubricationChecking the engine’s oil level Replacing the engine oilChecking the transmission oil level Lubricating the belt adjusterGeneral lubrication Troubleshooting schedule Problem ProcedureWinter storage ServiceStorage GuardTechnical data EC-declaration of conformity Applies to Europe only 1150315-26 ´z+R?T¶6&¨ ´z+R?T¶6&¨
Related manuals
Manual 40 pages 6.96 Kb

175, 175 AWD specifications

The Husqvarna 175 AWD is a powerful and versatile snow blower designed for residential and commercial use. Known for its reliability and performance, this machine excels in various snow conditions, making it an essential tool for winter maintenance.

One of the standout features of the 175 AWD is its all-wheel drive system. This technology provides superior traction and stability, ensuring that the snow blower can maneuver easily over uneven terrain and through deep snow. The AWD feature gives users peace of mind, knowing they can tackle challenging winter weather with confidence.

Equipped with a robust engine, the 175 AWD delivers impressive power. Its efficient engine design allows for superior throw distance, enabling users to clear large areas quickly. The snow blower’s 24-inch clearing width makes it particularly effective for broader driveways and walkways, significantly reducing the time spent on snow removal.

The 175 AWD also features an adjustable auger and chute, providing users with the flexibility to direct snow where it is needed. The auger is designed to handle heavy, packed snow as well as light, fluffy snow, making it adaptable to various snow conditions. The ability to modify the chute’s angle and direction ensures optimal performance in any scenario.

User comfort is another crucial aspect of the Husqvarna 175 AWD. It comes with heated hand grips that keep operators warm during cold winter days, allowing for extended use without discomfort. The ergonomic design and intuitive controls make it easy for users to operate the machine efficiently, even in challenging conditions.

Additionally, the snow blower features an easy-to-start ignition system, ensuring that it fires up promptly even in frigid temperatures. The durable construction of the 175 AWD is built to withstand the rigors of winter, offering longevity and reliable service for years to come.

In summary, the Husqvarna 175 AWD snow blower combines power, technology, and user-focused design. Its all-wheel drive system, adjustable features, and comfort enhancements make it a strong contender in the snow removal market. Whether for home or commercial use, the 175 AWD is designed to make snow clearing more manageable and efficient, ensuring that winter doesn’t slow you down. This machine stands out as a trusted companion in the fight against snow and ice, ready to take on the toughest winter challenges.
Top Page Image Contents