Husqvarna 175 AWD manual Service position for the cutting unit, Placing in the service position

Page 28

Maintenance

Service position for the cutting unit

The cutting head can be placed in the service position to provide easy access for cleaning, repairs and servicing. In the service position the cutting unit is raised and locked in the vertical position.

Placing in the service position

1Position the machine on flat ground. Apply the parking brake. Adjust the cutting unit to the lowest cutting height and lower the cutting unit.

2Remove the front hood by removing the pin. (There are complete instructions on using the service position inside the front hood).

3Remove the two support wheels from under the front hood.

4Fit the support wheels on either side of the rear of the cutting unit.

WARNING! Wear protective glasses when

!dismantling the cutting unit. The spring which tensions up the belt may break and cause personal injury.

5Disengage the spring for the drive belt tensioning wheel. Rider 175

Rider 175 AWD

6Place a foot on the front edge of the cutting unit near the wheel and raise the front edge of the unit to make it easier to remove the lift strut.

7 Engage the strut in the holder.

WARNING! Observe caution to avoid

!trapping your hand.

28 – English

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Rider 175 Rider 175 AWD Contents Pre-delivery service Service journalAfter the first 8 hours Introduction Dear CustomerDriving and transport on public roads TowingGood service Serial NumberKEY to Symbols SymbolsKEY to Symbols Safety Instructions Safety instructionsInsure your Rider General useDriving on slopes This is what you doMaintenance ChildrenTransport What is WHAT? Location of the controlsPresentation Cutting height adjustment lever Exercise care and refuel outdoors see safety instructionsSeat FuellingBefore starting DrivingStart the engine Starting the engine with a weak battery Connecting the jump leadsDriving the Rider Remove the cables in the reverse orderStop the engine Cutting tipsOther objects which can be thrown out by the blades Release lever Rider 175 AWD Release leverRelease lever Rider Maintenance Maintenance scheduleChecking and adjusting the steering wires CleaningRemoving of the machine hoods Adjusting the parking brake Rider Adjusting the parking brake Rider 175 AWDChecking and adjusting of throttle wire Can result in reduced braking abilityReplacing the air filter Replacement of fuel filterCool before starting to replace the air filter Check the level of the battery acid Checking the fuel pump’s air filterIgnition system Replacing the spark plugCheck the safety system When the engine is running. Mind your fingers Main fuseChecking the tyre pressure Checking the engine’s cooling air intakeRemoving the cutting unit Trapping your handChecking the cutting unit’s parallelism Adjusting the parallelism of the cutting unitReplacing the cutting unit belts Service position for the cutting unit Placing in the service positionChecking the blades Restoring from service positionRemoving the BioClip plug Lubrication Checking the engine’s oil levelChanging the oil filter Replacing the engine oilChecking the transmission oil level Lubricating the belt adjusterGeneral lubrication Troubleshooting schedule Problem ProcedureService StorageWinter storage GuardTechnical data EC-declaration of conformity Applies to Europe only 1150315-26 ´z+R?T¶6&¨ ´z+R?T¶6&¨
Related manuals
Manual 40 pages 6.96 Kb

175, 175 AWD specifications

The Husqvarna 175 AWD is a powerful and versatile snow blower designed for residential and commercial use. Known for its reliability and performance, this machine excels in various snow conditions, making it an essential tool for winter maintenance.

One of the standout features of the 175 AWD is its all-wheel drive system. This technology provides superior traction and stability, ensuring that the snow blower can maneuver easily over uneven terrain and through deep snow. The AWD feature gives users peace of mind, knowing they can tackle challenging winter weather with confidence.

Equipped with a robust engine, the 175 AWD delivers impressive power. Its efficient engine design allows for superior throw distance, enabling users to clear large areas quickly. The snow blower’s 24-inch clearing width makes it particularly effective for broader driveways and walkways, significantly reducing the time spent on snow removal.

The 175 AWD also features an adjustable auger and chute, providing users with the flexibility to direct snow where it is needed. The auger is designed to handle heavy, packed snow as well as light, fluffy snow, making it adaptable to various snow conditions. The ability to modify the chute’s angle and direction ensures optimal performance in any scenario.

User comfort is another crucial aspect of the Husqvarna 175 AWD. It comes with heated hand grips that keep operators warm during cold winter days, allowing for extended use without discomfort. The ergonomic design and intuitive controls make it easy for users to operate the machine efficiently, even in challenging conditions.

Additionally, the snow blower features an easy-to-start ignition system, ensuring that it fires up promptly even in frigid temperatures. The durable construction of the 175 AWD is built to withstand the rigors of winter, offering longevity and reliable service for years to come.

In summary, the Husqvarna 175 AWD snow blower combines power, technology, and user-focused design. Its all-wheel drive system, adjustable features, and comfort enhancements make it a strong contender in the snow removal market. Whether for home or commercial use, the 175 AWD is designed to make snow clearing more manageable and efficient, ensuring that winter doesn’t slow you down. This machine stands out as a trusted companion in the fight against snow and ice, ready to take on the toughest winter challenges.
Top Page Image Contents