Husqvarna K760 Wound up in the starter housing it is, Under tension and can, if handled, Injury

Page 27

MAINTENANCE

Starter

 

!

WARNING! When the recoil spring is

wound up in the starter housing it is

 

under tension and can, if handled

 

carelessly, pop out and cause personal

 

injury.

Always be careful when changing the recoil spring or the starter cord. Always wear protective goggles.

Changing a broken or worn starter cord

•Loosen the screws that hold the starter against the crankcase and remove the starter.

•Pull the cord out about 30 cm and lift it into the cut-out in the periphery of the starter pulley. When the cord is intact: Release the spring tension by letting the pulley rotate slowly backwards.

•Remove any remnants of the old starter cord and check that the return spring works. Insert the new starter cord through the hole in the starter housing and in the cord pulley.

•Secure the starter cord around the cord pulley as illustrated. Tighten the fastening well and ensure that the free end is as short as possible. Secure the end of the starter cord in the starter handle.

Tensioning the recoil spring

•Guide the cord through the cut-out in the periphery of the pulley and wind the cord 3 times clockwise around the centre of the starter pulley.

•Now pull the starter handle and in doing so tension the spring. Repeat the procedure once more, but this time with four turns.

•Note that the starter handle is drawn to its correct home position after tensioning the spring.

•Check that the spring is not drawn to its end position by pulling out the starter line fully. Slow the starter pulley with your thumb and check that you can turn the pulley at least a further half turn.

English – 27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents GB English K760 K760 RescueExplanation of warning levels KEY to SymbolsSymbols on the machine Manual versionContents Design and features PresentationDear Customer Presentation What is what on the power cutter K760?What is what on the power cutter K760 Rescue? Throttle lockout MACHINE´S Safety EquipmentStop switch GeneralBlade guard Vibration damping systemMuffler Hand held, high speed machines Cutting BladesSuitable cutting blades Cutting blades for different materialsDiamond blades Abrasive bladesDiamond blades for wet cutting Transport and storageDiamond blades and cooling Diamond blades for dry cuttingAssembling and Adjustments Reversible cutting head Disengaging OilGuard K760 OilGuardTwo-stroke oil Fuel HandlingFuel PetrolLet it cool for a few minutes before FuelingOilGuard K760 OilGuard Long-term storageGeneral safety precautions OperatingProtective equipment Basic working techniques Work area safetyTraining and protective equipment Managing dustKickback Pipe cutting Kickback zoneClimbing kickback Pinching kickbackHow to aviod kickback With a cold engine Starting and StoppingBefore starting StartingWith a warm engine StoppingMaintenance Maintenance scheduleFunctional inspection Functional inspection CleaningCarburettor Injury Wound up in the starter housing it isUnder tension and can, if handled Carelessly, pop out and cause personalFuel system Air filterDrive gear, clutch Technical Data Technical dataCutting equipment Applies to Europe only EC-declaration of conformityPage Page Page Page Page 1155019-26
Related manuals
Manual 5 pages 11.68 Kb

K760, K760 Rescue specifications

The Husqvarna K760 is a powerful and versatile cut-off saw designed for a variety of applications, making it a favorite among professionals and contractors alike. This robust machine is equipped with cutting-edge technology and a range of features that enhance its performance and usability.

One of the main features of the K760 is its engine, which boasts a 5.3 HP output. This ensures that the saw can tackle tough materials such as concrete, asphalt, and brick with ease. The engine uses a X-Torq technology, which not only provides excellent power but also reduces fuel consumption and emissions. This makes the K760 an environmentally friendly option for those looking for high-performance cutting tools.

The K760 incorporates a smart start system, allowing for almost effortless starting. This feature minimizes the effort required to start the saw, meaning less time spent preparing and more time spent cutting. Additionally, the machine is equipped with a fuel pump that delivers fuel to the carburetor, making it easier to start in cold conditions.

Durability is a key characteristic of the K760. It features a lightweight yet durable magnesium housing which resists wear and tear from regular use. The saw also has an ergonomic design that reduces vibrations, offering greater comfort during prolonged operation. This is complemented by a handle that can be adjusted for different cutting positions, enhancing maneuverability and user control.

Another significant technology in the K760 is the Active Air Filtration system. This high-efficiency air filtration system extends the life of the engine by ensuring that dust and debris are kept to a minimum. The filter is designed to be cleaned and maintained easily, allowing for a simple maintenance routine.

The K760’s cutting capabilities are further enhanced by its compatibility with a range of diamond blades, making it suitable for various materials and thicknesses. The ability to choose the right blade for the job adds to the machine's versatility.

Safety features are also paramount in the design of the K760. It includes an integrated water attachment system that allows for wet cutting, reducing dust and improving safety on the job site. The saw also has a blade guard that helps protect the user from accidental contact.

In conclusion, the Husqvarna K760 stands out in the market for its powerful engine, advanced technology, durable construction, and user-friendly features. It is designed for professionals seeking a reliable and efficient cut-off saw that can handle a variety of demanding tasks with precision and ease. Whether it’s for heavy construction or maintenance work, the K760 delivers exceptional performance that meets the needs of any cutting job.
Top Page Image Contents