Husqvarna K760 Cutting Blades, Suitable cutting blades, Cutting blades for different materials

Page 9

CUTTING BLADES

General

!

WARNING! A cutting blade may burst

and cause injury to the operator.

 

The cutting blade manufacturer issues warnings and recommendations for the use and proper care of the cutting blade. Those warnings come with the cutting blade. Read and follow all instructions from the cutting blade manufacturer.

A cutting blade should be checked before it is assembled on the saw and frequently during use. Look for cracks, lost segments (diamond blades) or pieces broken off. Do not use a damaged cutting blade.

Test the integrity of each new cutting blade by running it at full throttle for about 1 minute.

•Cutting blades are available in two basic designs; abrasive blades and diamond blades.

•High-quality blades are often most economical. Lower quality blades often have inferior cutting capacity and a shorter service life, which results in a higher cost in relation to the quantity of material that is cut.

•Make sure that the right bushing is used for the cutting blade to be fitted on the machine. See the instructions under the heading Fitting the cutting blade.

Suitable cutting blades

Cutting blades

K760

K760 Rescue

 

 

 

Abrasive blades

Yes*

Yes*

 

 

 

Diamond blades

Yes

Yes

 

 

 

Toothed blads

Do not use

Yes**

 

 

 

For more information, see the ”Technical data” section.

*Without water

**See instructions under the heading "Toothed blades, carbide tipped blades and emergency situations".

Cutting blades for different materials

WARNING! Never use a cutting blade for

! any other materials than what it was intended to cut.

Never use a diamond blade to cut plastic material. The heat produced during cutting may melt the plastic and it can stick to the cutting blade and cause a kickback.

Cutting metal generates sparks that may cause fire. Do not use the machine near ignitable substances or gases.

Follow the instructions supplied with the cutting blade concerning the suitability of the blade for various applications, or consult your dealer in case of doubts.

 

Concrete

Metal

Plastic

Cast iron

 

 

 

 

 

Abrasive

X

X

X

X

blades

 

 

 

 

Diamon

X

X*

 

X*

d blades

 

 

 

 

 

 

 

 

 

 

* Only specialty blades.

 

 

 

Hand held, high speed machines

WARNING! Never use a cutting blade with a

! lower speed rating than that of the power cutter. Only use cutting blades intended for high speed handheld power cutters.

• Many cutting blades that might fit this power cutter are intended for stationary saws and have a lower speed rating than is needed for this hand-held saw. Cutting blades with a lower speed rating shall never be used on this saw.

• Husqvarna cutting blades are manufactured for high- speed, portable power cutters.

• Check that the blade is approved for the same or higher speed according to the aproval plate of the engine. Never use a cutting blade with a lower speed rating than that of the power cutter.

Blade vibration

•The blade can become out-of-round and vibrate if an excessive feed pressure is used.

•A lower feed pressure can stop the vibration. Otherwise replace the blade.

English – 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents GB English K760 K760 RescueSymbols on the machine KEY to SymbolsManual version Explanation of warning levelsContents Design and features PresentationDear Customer Presentation What is what on the power cutter K760?What is what on the power cutter K760 Rescue? Stop switch MACHINE´S Safety EquipmentGeneral Throttle lockoutBlade guard Vibration damping systemMuffler Suitable cutting blades Cutting BladesCutting blades for different materials Hand held, high speed machinesDiamond blades Abrasive bladesDiamond blades and cooling Transport and storageDiamond blades for dry cutting Diamond blades for wet cuttingAssembling and Adjustments Reversible cutting head Disengaging OilGuard K760 OilGuardFuel Fuel HandlingPetrol Two-stroke oilOilGuard K760 OilGuard FuelingLong-term storage Let it cool for a few minutes beforeGeneral safety precautions OperatingProtective equipment Basic working techniques Work area safetyTraining and protective equipment Managing dustKickback Climbing kickback Kickback zonePinching kickback Pipe cuttingHow to aviod kickback Before starting Starting and StoppingStarting With a cold engineWith a warm engine StoppingMaintenance Maintenance scheduleFunctional inspection Functional inspection CleaningCarburettor Under tension and can, if handled Wound up in the starter housing it isCarelessly, pop out and cause personal InjuryFuel system Air filterDrive gear, clutch Technical Data Technical dataCutting equipment Applies to Europe only EC-declaration of conformityPage Page Page Page Page 1155019-26
Related manuals
Manual 5 pages 11.68 Kb

K760, K760 Rescue specifications

The Husqvarna K760 is a powerful and versatile cut-off saw designed for a variety of applications, making it a favorite among professionals and contractors alike. This robust machine is equipped with cutting-edge technology and a range of features that enhance its performance and usability.

One of the main features of the K760 is its engine, which boasts a 5.3 HP output. This ensures that the saw can tackle tough materials such as concrete, asphalt, and brick with ease. The engine uses a X-Torq technology, which not only provides excellent power but also reduces fuel consumption and emissions. This makes the K760 an environmentally friendly option for those looking for high-performance cutting tools.

The K760 incorporates a smart start system, allowing for almost effortless starting. This feature minimizes the effort required to start the saw, meaning less time spent preparing and more time spent cutting. Additionally, the machine is equipped with a fuel pump that delivers fuel to the carburetor, making it easier to start in cold conditions.

Durability is a key characteristic of the K760. It features a lightweight yet durable magnesium housing which resists wear and tear from regular use. The saw also has an ergonomic design that reduces vibrations, offering greater comfort during prolonged operation. This is complemented by a handle that can be adjusted for different cutting positions, enhancing maneuverability and user control.

Another significant technology in the K760 is the Active Air Filtration system. This high-efficiency air filtration system extends the life of the engine by ensuring that dust and debris are kept to a minimum. The filter is designed to be cleaned and maintained easily, allowing for a simple maintenance routine.

The K760’s cutting capabilities are further enhanced by its compatibility with a range of diamond blades, making it suitable for various materials and thicknesses. The ability to choose the right blade for the job adds to the machine's versatility.

Safety features are also paramount in the design of the K760. It includes an integrated water attachment system that allows for wet cutting, reducing dust and improving safety on the job site. The saw also has a blade guard that helps protect the user from accidental contact.

In conclusion, the Husqvarna K760 stands out in the market for its powerful engine, advanced technology, durable construction, and user-friendly features. It is designed for professionals seeking a reliable and efficient cut-off saw that can handle a variety of demanding tasks with precision and ease. Whether it’s for heavy construction or maintenance work, the K760 delivers exceptional performance that meets the needs of any cutting job.
Top Page Image Contents