Husqvarna Fueling, OilGuard K760 OilGuard, Long-term storage, Refuelling. The engine should be

Page 15

FUEL HANDLING

Fueling

!

WARNING! Always stop the engine and

let it cool for a few minutes before

 

 

refuelling. The engine should be

 

switched off, and the stop switch in

 

STOP position.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Clean the area around the fuel cap.

Tighten the fuel cap carefully after refuelling.

If the cap is not properly tightened the cap might vibrate lose and fuel may escape from the fuel tank creating a fire hazard.

Move the machine at least 3 m from the refuelling point before starting it.

Never start the machine:

•If you have spilt fuel or engine oil on the machine. Wipe off the spill and allow the remaining fuel to evaporate.

•If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

•If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

•Unless the fuel cap is securely tightened after refueling.

Transport and storage

•Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked flames, for example, from electrical machinery, electric motors, electrical relays/ switches or boilers.

•When storing and transporting fuel always use approved containers intended for this purpose.

Long-term storage

•When storing the machine for long periods the fuel tank must be emptied. Contact your local petrol station to find out where to dispose of excess fuel.

OilGuard (K760 OilGuard)

•Machines fitted with OilGuard have a built-in system for identifying incorrect fuel mixtures.

•Once the machine is running, a detector reads the fuel quality which takes about ten seconds. If the correct amount of Husqvarna OilGuard oil has been used, the machine will run at a normal speed. If the wrong type of oil has been used, the machine senses this and restricts the speed of the engine to 3,800 rpm to avoid damaging the engine.

•In order for the machine to run at normal speed again, you must drain the incorrect fuel mixture and then fill the machine with a fuel mixture containing the correct ratio (2 %) of Husqvarna OilGuard oil.

English – 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents GB English K760 K760 RescueExplanation of warning levels KEY to SymbolsSymbols on the machine Manual versionContents Design and features PresentationDear Customer Presentation What is what on the power cutter K760?What is what on the power cutter K760 Rescue? Throttle lockout MACHINE´S Safety EquipmentStop switch GeneralBlade guard Vibration damping systemMuffler Hand held, high speed machines Cutting BladesSuitable cutting blades Cutting blades for different materialsDiamond blades Abrasive bladesDiamond blades for wet cutting Transport and storageDiamond blades and cooling Diamond blades for dry cuttingAssembling and Adjustments Reversible cutting head Disengaging OilGuard K760 OilGuardTwo-stroke oil Fuel HandlingFuel PetrolLet it cool for a few minutes before FuelingOilGuard K760 OilGuard Long-term storageGeneral safety precautions OperatingProtective equipment Basic working techniques Work area safetyTraining and protective equipment Managing dustKickback Pipe cutting Kickback zoneClimbing kickback Pinching kickbackHow to aviod kickback With a cold engine Starting and StoppingBefore starting StartingWith a warm engine StoppingMaintenance Maintenance scheduleFunctional inspection Functional inspection CleaningCarburettor Injury Wound up in the starter housing it isUnder tension and can, if handled Carelessly, pop out and cause personalFuel system Air filterDrive gear, clutch Technical Data Technical dataCutting equipment Applies to Europe only EC-declaration of conformityPage Page Page Page Page 1155019-26
Related manuals
Manual 5 pages 11.68 Kb

K760, K760 Rescue specifications

The Husqvarna K760 is a powerful and versatile cut-off saw designed for a variety of applications, making it a favorite among professionals and contractors alike. This robust machine is equipped with cutting-edge technology and a range of features that enhance its performance and usability.

One of the main features of the K760 is its engine, which boasts a 5.3 HP output. This ensures that the saw can tackle tough materials such as concrete, asphalt, and brick with ease. The engine uses a X-Torq technology, which not only provides excellent power but also reduces fuel consumption and emissions. This makes the K760 an environmentally friendly option for those looking for high-performance cutting tools.

The K760 incorporates a smart start system, allowing for almost effortless starting. This feature minimizes the effort required to start the saw, meaning less time spent preparing and more time spent cutting. Additionally, the machine is equipped with a fuel pump that delivers fuel to the carburetor, making it easier to start in cold conditions.

Durability is a key characteristic of the K760. It features a lightweight yet durable magnesium housing which resists wear and tear from regular use. The saw also has an ergonomic design that reduces vibrations, offering greater comfort during prolonged operation. This is complemented by a handle that can be adjusted for different cutting positions, enhancing maneuverability and user control.

Another significant technology in the K760 is the Active Air Filtration system. This high-efficiency air filtration system extends the life of the engine by ensuring that dust and debris are kept to a minimum. The filter is designed to be cleaned and maintained easily, allowing for a simple maintenance routine.

The K760’s cutting capabilities are further enhanced by its compatibility with a range of diamond blades, making it suitable for various materials and thicknesses. The ability to choose the right blade for the job adds to the machine's versatility.

Safety features are also paramount in the design of the K760. It includes an integrated water attachment system that allows for wet cutting, reducing dust and improving safety on the job site. The saw also has a blade guard that helps protect the user from accidental contact.

In conclusion, the Husqvarna K760 stands out in the market for its powerful engine, advanced technology, durable construction, and user-friendly features. It is designed for professionals seeking a reliable and efficient cut-off saw that can handle a variety of demanding tasks with precision and ease. Whether it’s for heavy construction or maintenance work, the K760 delivers exceptional performance that meets the needs of any cutting job.
Top Page Image Contents