Husqvarna 115 13 81-95 manual Fueling, Fuel safety, Transport and storage, Long-term storage

Page 20

FUEL HANDLING

Fueling

!

WARNING! Taking the following

precautions, will lessen the risk of fire:

 

Do not smoke and do not place any hot objects in the vicinity of fuel.

Always stop the engine and let it cool for a few minutes before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

Clean the area around the fuel cap. Clean the fuel and chain oil tanks regularly. The fuel filter must be replaced at least once a year. Contamination in the tanks causes malfunction. Make sure the fuel is well mixed by shaking the container before refuelling.The capacities of the chain oil tank and fuel tank are carefully matched. You should therefore always fill the chain oil tank and fuel tank at the same time.

WARNING! Fuel and fuel vapor are highly

! flammable. Take care when handling fuel and chain oil. Be aware of the risks of fire, explosion and those associated with inhalation.

Fuel safety

•Never refuel the machine while the engine is running.

•Make sure there is plenty of ventilation when refuelling or mixing fuel (gasoline and 2-stroke oil).

•Move the machine at least 10 ft (3 m) from the refuelling point before starting it.

•Never start the machine:

1If you have spilled fuel or chain oil on the machine. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilled fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

WARNING! Never use a machine with

! visible damage to the spark plug guard and ignition cable. A risk of sparking arises, which can cause a fire.

Transport and storage

•Always store the chain saw and fuel so that there is no risk of leakages or fumes coming into contact with sparks or naked flames from electrical equipment, electric motors, relays/switches, boilers and the like.

•Always store fuel in an approved container designed for that purpose.

•For longer periods of storage or for transport of the chain saw, the fuel and chain oil tanks should be emptied. Ask where you can dispose of waste fuel and chain oil at your local gas station.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The bar guard must always be fitted to the cutting attachment when the machine is being transported or in storage, in order to prevent accident contact with the sharp chain. Even a non-moving chain can cause serious cuts to yourself or persons you bump into with an exposed chain.

•Remove the spark plug cap from the spark plug. Activate the chain brake.

Long-term storage

Empty the fuel/oil tanks in a well ventilated area. Store the fuel in approved cans in a safe place. Fit the bar guard. Clean the machine. See instructions under the heading Maintenance schedule.

20 – English

115 13 81-95 Rev.3 2008-12-15

Page 19 Page 21
Image 20
Page 19 Page 21
Contents 445 445e 450e KEY to Symbols Symbols on the machineSymbols in the operator’s manual You will find the following labels on your chain sawContents Introduction Dear customerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawMachine′s safety equipment Always use common sensePersonal protective equipment Chain brake and front hand guardGeneral Safety Precautions Right hand guard Throttle lockoutChain catcher Stop switch Cutting equipmentVibration damping system MufflerGeneral rules Cutting equipment designed to reduce kickbackBar ChainSharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethTensioning the chain 445 445e, 450eChecking chain lubrication Lubricating cutting equipmentFilling with chain oil Checking wear on cutting equipment Chain drive sprocketNeedle bearing lubrication Assembly Fitting the bar and chain445 445e, 450eAssembly Fuel Handling FuelFuel safety FuelingTransport and storage Long-term storageStarting and Stopping Starting and stoppingStarting Cold engineStopping Basic safety rules Working TechniquesBefore use General working instructionsGeneral rules Basic cutting technique TermsTree felling technique LimbingLog is supported at one end. There is a high risk Safe distanceDirectional cuts Felling directionClearing the trunk and preparing your retreat Felling cut Freeing a tree that has fallen badly How to avoid kickbackWhat is kickback? Cutting the trunk into logs General MaintenanceCarburetor adjustment Checking the inertia brake release Muffler Tensioning the recoil spring StarterReplacing the starter cord Air filter Replacing the return and drive springsFitting the starter Recoil spring aSpark plug Lubricating the bar tip sprocketNeedle bearing lubrication Cooling systemWinter use Air Injection centrifugal cleaningTemperature -5C 23F or colder Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataBar and chain combinations Saw chain filing and file gauges050/1,3 mm 058/1,5 mmFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsAmerican Standard Safety Precautions Safety precautions for chain sawOther safety precautions Kickback safety precautionsPage 1151381-95

115 13 81-95 specifications

The Husqvarna 115 13 81-95 is a reliable and efficient chainsaw designed for homeowners and occasional users who seek powerful performance combined with user-friendly features. It stands out in the Husqvarna family due to its exceptional design tailored for easy handling and effective operation.

One of the main features of the Husqvarna 115 is its lightweight construction. Weighing in at just over 4.4 kg, this chainsaw is easy to maneuver, making it a perfect choice for tasks like tree pruning, cutting firewood, or tackling small to medium-sized trees. Its compact size and balanced design enhance user control, reducing fatigue during extended use.

The 115 13 81-95 incorporates Husqvarna's unique X-Torq engine technology, which is engineered to reduce fuel consumption and emissions. This environmentally-friendly feature allows users to work efficiently while minimizing their ecological impact. The engine is designed to provide high torque over a wide RPM range, ensuring powerful cuts without sacrificing performance.

Another remarkable feature is the chainsaw’s Smart Start technology, which allows for effortless starting. With an integrated fuel pump and a starting system that requires minimal effort, even inexperienced users can start the chainsaw with ease. This practicality is particularly important when working outdoors, where difficulties in starting can often lead to frustration.

The 115 also features an automatic oiler system that ensures the chain and bar are adequately lubricated, enhancing cutting efficiency and prolonging the lifespan of the tool. The adjustable chain tensioning system is easily accessible, allowing users to make quick adjustments without the need for additional tools, making maintenance simple and straightforward.

Safety is paramount with the Husqvarna 115 13 81-95, which includes a chain brake that activates automatically to prevent accidents during operation. Its ergonomic handle design improves comfort and grip, enhancing overall safety and control.

In conclusion, the Husqvarna 115 13 81-95 is a powerful yet lightweight chainsaw ideal for homeowners and casual users. Its combination of innovative technologies, user-friendly features, and strong performance makes it a top choice for anyone looking to undertake gardening or small-scale forestry tasks with confidence and ease. Whether you're a beginner or an experienced user, this chainsaw offers reliability and comfort, ensuring a successful cutting experience.
Top Page Image Contents