Husqvarna 115 13 81-95 manual Starting and Stopping, Starting and stopping, Cold engine

Page 21

STARTING AND STOPPING

Starting and stopping

WARNING! Note the following before

! starting:

The chain brake must be engaged when the chain saw is started to reduce the chance of contact with the moving chain during starting.

Never start a chain saw unless the bar, chain and all covers are fitted correctly. Otherwise the clutch can come loose and cause personal injuries.

Place the machine on firm ground. Make sure you have a secure footing and that the chain cannot touch anything.

Keep people and animals well away from the working area.

Never wrap the starter cord around your hand.

Starting

The chain brake should be activated when starting the chain saw. Activate the chain brake by pushing the front hand guard forwards.

Cold engine

Start position (1): Set the start/stop switch in the choke position by pulling the red control outward - upward.

Decompression valve (2): Press the valve to reduce the pressure in the cylinder and make starting easier. Once the machine has started the valve will automatically return to its original setting.

Air purge (3): Press the air purge diaphragm repeatedly until fuel fills the diaphragm (at least 6 times). The diaphragm need not be completely filled.

Pull the starter handle (4): Pull the starter handle with your right hand and pull out the starter cord slowly until you feel a resistance (as the starter pawls engage) then pull firmly and rapidly until the engine fires.

Push down the red choke control (5): As soon as the engine fires which can be heard through a "puff" sound, push down on the red choke control.

Pull the starter handle (6): Keep on pulling the cord powerfully until the engine starts.

Warm engine

Start position (1): The correct choke/start throttle setting for warm starting is obtained by initially moving the choke control by pulling the red control outward - upwards.

Decompression valve (2): Press the valve to reduce the pressure in the cylinder and make starting easier. Once the machine has started the valve will automatically return to its original setting.

Air purge (3): Press the air purge diaphragm repeatedly until fuel fills the diaphragm (at least 6 times). The diaphragm need not be completely filled.

Push down the red choke control (5): This inactivates the choke, which is not needed when starting a warm chain saw. However the movement of the start/stop switch will have engaged a high idle, making warm starting easier.

Pull the starter handle (6): Grip the front handle with your left hand. Hold the chain saw on the ground by placing your right foot through the rear handle.

Pull the starter handle with your right hand and pull out the starter cord slowly until you feel a resistance (as the starter pawls engage) then pull firmly and rapidly until the engine fires.

As the chain brake is still engaged the speed of the engine must be set to idling as soon as possible, this is achieved by disengaging the throttle lock. Disengagement is done

3

A2

by gently touching on the throttle trigger. This prevents unnecessary wear to the clutch, clutch drum and brake band. Allow the machine to idle a few seconds before giving full throttle.

1

Grip the front handle with your left hand. Hold the chain saw on the ground by placing your right foot through the rear handle.

There is a simplified start reminder with illustrations to describe each step on the rear edge of the saw (A).

115 13 81-95 Rev.3 2008-12-15

English – 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 445 445e 450e Symbols on the machine KEY to SymbolsSymbols in the operator’s manual You will find the following labels on your chain sawContents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?Before using a new chain saw General Safety PrecautionsAlways use common sense Machine′s safety equipmentPersonal protective equipment Chain brake and front hand guardGeneral Safety Precautions Throttle lockout Chain catcherRight hand guard Cutting equipment Stop switchVibration damping system MufflerCutting equipment designed to reduce kickback General rulesBar ChainGeneral information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingTensioning the chain 445e, 450e 445Lubricating cutting equipment Filling with chain oilChecking chain lubrication Chain drive sprocket Needle bearing lubricationChecking wear on cutting equipment Fitting the bar and chain Assembly445 445e, 450eAssembly Fuel Fuel HandlingFueling Fuel safetyTransport and storage Long-term storageStarting and stopping Starting and StoppingStarting Cold engineStopping Working Techniques Basic safety rulesBefore use General working instructionsGeneral rules Terms Basic cutting techniqueLimbing Tree felling techniqueLog is supported at one end. There is a high risk Safe distanceFelling direction Clearing the trunk and preparing your retreatDirectional cuts Felling cut How to avoid kickback What is kickback?Freeing a tree that has fallen badly Cutting the trunk into logs Maintenance Carburetor adjustmentGeneral Checking the inertia brake release Muffler Starter Replacing the starter cordTensioning the recoil spring Replacing the return and drive springs Air filterFitting the starter Recoil spring aLubricating the bar tip sprocket Spark plugNeedle bearing lubrication Cooling systemAir Injection centrifugal cleaning Temperature -5C 23F or colderWinter use Daily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain filing and file gauges Bar and chain combinations050/1,3 mm 058/1,5 mmYour Warranty Rights and Obligations Federal Emission Control Warranty StatementSafety precautions for chain saw American Standard Safety PrecautionsOther safety precautions Kickback safety precautionsPage 1151381-95

115 13 81-95 specifications

The Husqvarna 115 13 81-95 is a reliable and efficient chainsaw designed for homeowners and occasional users who seek powerful performance combined with user-friendly features. It stands out in the Husqvarna family due to its exceptional design tailored for easy handling and effective operation.

One of the main features of the Husqvarna 115 is its lightweight construction. Weighing in at just over 4.4 kg, this chainsaw is easy to maneuver, making it a perfect choice for tasks like tree pruning, cutting firewood, or tackling small to medium-sized trees. Its compact size and balanced design enhance user control, reducing fatigue during extended use.

The 115 13 81-95 incorporates Husqvarna's unique X-Torq engine technology, which is engineered to reduce fuel consumption and emissions. This environmentally-friendly feature allows users to work efficiently while minimizing their ecological impact. The engine is designed to provide high torque over a wide RPM range, ensuring powerful cuts without sacrificing performance.

Another remarkable feature is the chainsaw’s Smart Start technology, which allows for effortless starting. With an integrated fuel pump and a starting system that requires minimal effort, even inexperienced users can start the chainsaw with ease. This practicality is particularly important when working outdoors, where difficulties in starting can often lead to frustration.

The 115 also features an automatic oiler system that ensures the chain and bar are adequately lubricated, enhancing cutting efficiency and prolonging the lifespan of the tool. The adjustable chain tensioning system is easily accessible, allowing users to make quick adjustments without the need for additional tools, making maintenance simple and straightforward.

Safety is paramount with the Husqvarna 115 13 81-95, which includes a chain brake that activates automatically to prevent accidents during operation. Its ergonomic handle design improves comfort and grip, enhancing overall safety and control.

In conclusion, the Husqvarna 115 13 81-95 is a powerful yet lightweight chainsaw ideal for homeowners and casual users. Its combination of innovative technologies, user-friendly features, and strong performance makes it a top choice for anyone looking to undertake gardening or small-scale forestry tasks with confidence and ease. Whether you're a beginner or an experienced user, this chainsaw offers reliability and comfort, ensuring a successful cutting experience.
Top Page Image Contents