Hustler Turf M-1 manual Preparation and inspection, Engine operation

Page 15

Operation

WARNING: Before inspection, stop the engine and remove the spark plug wire from the spark plug.

A.Preparation and inspection

1.Place the mower on a level surface.

2.Check the engine oil level using the engine oil dip- stick. Do not screw dipstick into tube when checking engine oil. Make sure the oil level is between the upper and lower limits on the dipstick. Replenish oil if necessary. Make sure the dipstick is properly seated when reinstalled in the dipstick housing. Fig. 4-18

3.Check the fuel level and fill fuel tank if necessary. Make sure the fuel cap is screwed on properly and tight before beginning operation. Fig. 4-19

4.If catching: Check the grass bag for any holes or damage. Replace if damaged.

If mulching: Check that the spacer, stand/stopper and plug are in place and the guard is in the lowest position and is resting against the plug.

5.Check the machine for loose hardware or parts. Make sure all covers and guards are properly installed.

6.Check the mower blade for damage and proper blade bolt torque. Replace blade if damaged. Refer to Mower Blade Maintenance section for more detailed information.

Dipstick

Fig. 4-18

Fuel cap

Fig. 4-19

B.Checking the Blade Brake Clutch safety system Check the blade brake clutch safety system daily, prior to each use. This system is an important mower safety feature. It should be repaired immediately if it malfunctions.

1.Stop the engine and wait for all moving parts to stop.

2.Move the mower onto a paved surface that is located in a non-windy area.

3.Set the cutting height to 2-1/2” (6.4cm) at all four wheels.

4.Crumple a half sheet of newspaper into a ball small enough to go under the deck (approximately 3” or 7.6cm in diameter).

5.Place the newspaper ball 5” (12.7cm) in front of the mower.

6.Start the engine.

7.Engage the blade lever to start the blade.

8.After the blade is spinning, disengage the blade lever. You should hear a change in the noise the mower is making. This will be due to the blade stopping and the engine sound increasing because no load is being applied to it.

9.Immediately push the mower over the newspaper ball.

10.Stop the engine and wait for all moving parts to stop.

11.Walk around the mower to check for the newspaper ball. If the ball did not go under the mower then repeat steps 5 through 10.

12.Move the mower away from the newspaper ball. If the newspaper ball has unraveled or is shredded, the blade is not stopping properly, resulting in unsafe operating conditions. Contact your Hustler Turf Dealer before continuing operation.

C.Engine operation

1.Attach the spark plug wire to the spark plug.

2.Set the fuel cock to the “ON” (open) position. Fig. 4-20

ON

Fig. 4-20

3.Set the throttle to the “CHOKE” position if starting a cold engine. Set the throttle to the “FAST” position if the engine is warm. Fig. 4-21

Throttle lever

(choke position)

Fig. 4-21

4.To start the engine: Lightly pull on the starter rope handle until you can feel resistance. Make sure you have a good grip on the handle and then pull on the starter rope handle with more force. After engine has started allow the starter rope to return to the recoil starter handle slowly.

4-8

108548_1208

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Page To the new owner Using this manualWarranty registration Parts and service1085481208 What is Covered by this Warranty Time Limit Safety and Instruction Decals Safety PrecautionsOperating Operation Safe Operating PracticesChildren Slope OperationParts List AssemblyUpper handle Description Qty Mulch kitGuard 1085481208 OFF Engine operation Preparation and inspectionMowing operation Grass catcher Cutting height adjustmentTransporting the mower To shutdown the mower do the following1085481208 1085481208 Service Safe Servicing PracticesIntroduction Engine oil and filter Torque valuesWashing the mower Fuel systemReplacing the blade Checking the bladeThrottle lever adjustment Blade lever adjustmentDrive clutch lever Gearshift lever Intervals Indicated Hours Hustler M-1 Maintenance ScheduleNew season preparation Preparation of engine for storageParts Manual General Information Standard Torques Mower Deck Assembly Mower Deck Assy Wheel Breakdown Service Brake Assembly Service Part Cover Unit Plain Washer Gear Case Gear Case Assembly Mulch Kit Plug Handle, Levers & Catcher System Handle Decals Safe Operation Decal 1085481208 Index 601957 6-13 Preparation of engine for storage

M-1 specifications

Hustler Turf M-1 is a leading name in the world of commercial mowers, designed meticulously to cater to the needs of lawn care professionals and landscaping companies. This innovative mower showcases Hustler's commitment to performance, efficiency, and ease of use, making it a top choice for those requiring reliable equipment for large-scale mowing tasks.

One of the main features of the Hustler Turf M-1 is its impressive cutting capacity. Equipped with a powerful engine, the M-1 can tackle extensive areas of grass with ease, providing a clean, even cut every time. The mower boasts a wide cutting deck, which can range from 48 to 72 inches, allowing for fewer passes over large properties and significantly reducing mowing time. This efficiency is crucial for professionals who need to maintain productivity and meet tight schedules.

The M-1 is also designed for optimal maneuverability. Its compact design, combined with a responsive steering system, allows users to navigate tight corners and intricate landscapes without hassle. This is further enhanced by its low center of gravity, which not only contributes to stability but also ensures comfortable handling on slopes and uneven terrains.

In terms of technology, the Hustler Turf M-1 incorporates advanced features that increase productivity and user comfort. The mower is equipped with an intuitive control panel, providing easy access to all functions. Operators can quickly adjust cutting heights, manage speed settings, and monitor engine performance, creating a streamlined mowing experience.

Additionally, Hustler has integrated innovative maintenance technologies into the M-1. The mower features easily accessible service points, simplifying routine upkeep and reducing downtime. The robust construction of the M-1 means it's built to last, with durable materials that can withstand the rigors of daily commercial use.

Comfort is another hallmark of the Hustler Turf M-1. The ergonomic seat design, adjustable armrests, and user-friendly controls ensure that operators can work for extended periods without discomfort.

Furthermore, the mower's fuel-efficient engine not only saves on operating costs but also minimizes environmental impact, aligning with the growing demand for eco-friendly landscaping practices.

In summary, the Hustler Turf M-1 is a powerful, efficient, and versatile mower that meets the demands of professional lawn care. Its combination of innovative features, advanced technology, and superior design make it an exceptional investment for those in the landscaping industry. Whether tackling commercial properties or large residential lawns, the M-1 stands out as a reliable and effective choice for serious lawn care professionals.
Top Page Image Contents