Mowing operation | Hustler Turf M-1 instruction

NOTE: Make sure that the blade lever and the drive clutch lever are disengaged before starting the engine.

WARNING: Make sure there is no person or object in front of, or behind you when pulling on the starter rope.

5.Allow the engine to warm up before mowing. Set throttle lever to the “FAST” position when mowing. Fig. 4-22

NOTE: The engine may stall if the blades are engaged with the throttle in the “SLOW” position.

Throttle lever (fast position)

Fig. 4-22

6.To stop the engine: Release the blade lever and the drive clutch lever. Set throttle to the “STOP” posi- tion. When engine has stopped, rotate the fuel cock to the “OFF” (closed) position. Fig. 4-23 and Fig. 4-24 NOTE: Do not stop the engine with the throttle set in the “CHOKE” position. Restarting the engine will become harder if this occurs. However, if the engine will not stop with the throttle set to the “STOP” posi- tion then set the throttle to the “CHOKE” position to shutoff the engine. If the “CHOKE” method is neces- sary to stop the engine, check the throttle control for proper adjustment. Re-adjust if necessary.

Throttle lever (stop position)

Fig. 4-23

OFF

Fig. 4-24

D.Mowing operation

When operating this mower observe the instructions and safety items in this manual.

Use this mower when the outside air temperature is

between 40o and 105o F (5o and 40o C). Failure to use this machine within this temperature range may result in a malfunction, breakdown or accidents.

WARNING: All operators and mechanics must become familiar with the safe operation of the equip- ment, operator controls and safety signs before using this machine.

1.Perform the daily inspection and preparation routine found elsewhere in this manual before starting opera- tion.

2.Start engine per the Engine Operation section.

3.Set the throttle lever to the “FAST” position. Fig. 4-25

Throttle lever

Fig. 4-25

4.Push the blade lever forward while pressing on the yellow button. This will engage the blade clutch. Make sure the lever is pushed forward until it touches the handle. Fig. 4-26

NOTE: The blade will not engage unless the yellow button is depressed.

Yellow	Blade lever
button

Blade disengaged

Blade engaged

Fig. 4-26

5.To drive the mower forward: Step toward the han- dle while pushing the drive clutch lever forward to engage the transmission. Make sure the lever is pushed forward until it touches the handle. Fig. 4-27IMPORTANT: Do not require the machine to pull you forward. This will result in premature transmis- sion failure.

108548_1208

4-9

M-1 specifications

Hustler Turf M-1 is a leading name in the world of commercial mowers, designed meticulously to cater to the needs of lawn care professionals and landscaping companies. This innovative mower showcases Hustler's commitment to performance, efficiency, and ease of use, making it a top choice for those requiring reliable equipment for large-scale mowing tasks.

One of the main features of the Hustler Turf M-1 is its impressive cutting capacity. Equipped with a powerful engine, the M-1 can tackle extensive areas of grass with ease, providing a clean, even cut every time. The mower boasts a wide cutting deck, which can range from 48 to 72 inches, allowing for fewer passes over large properties and significantly reducing mowing time. This efficiency is crucial for professionals who need to maintain productivity and meet tight schedules.

The M-1 is also designed for optimal maneuverability. Its compact design, combined with a responsive steering system, allows users to navigate tight corners and intricate landscapes without hassle. This is further enhanced by its low center of gravity, which not only contributes to stability but also ensures comfortable handling on slopes and uneven terrains.

In terms of technology, the Hustler Turf M-1 incorporates advanced features that increase productivity and user comfort. The mower is equipped with an intuitive control panel, providing easy access to all functions. Operators can quickly adjust cutting heights, manage speed settings, and monitor engine performance, creating a streamlined mowing experience.

Additionally, Hustler has integrated innovative maintenance technologies into the M-1. The mower features easily accessible service points, simplifying routine upkeep and reducing downtime. The robust construction of the M-1 means it's built to last, with durable materials that can withstand the rigors of daily commercial use.

Comfort is another hallmark of the Hustler Turf M-1. The ergonomic seat design, adjustable armrests, and user-friendly controls ensure that operators can work for extended periods without discomfort.

Furthermore, the mower's fuel-efficient engine not only saves on operating costs but also minimizes environmental impact, aligning with the growing demand for eco-friendly landscaping practices.

In summary, the Hustler Turf M-1 is a powerful, efficient, and versatile mower that meets the demands of professional lawn care. Its combination of innovative features, advanced technology, and superior design make it an exceptional investment for those in the landscaping industry. Whether tackling commercial properties or large residential lawns, the M-1 stands out as a reliable and effective choice for serious lawn care professionals.