Husqvarna 380BTS/BFS Working Conditions, Working Circumstance, Avoid Noise Problem, Working Plan

Page 6

English

Safety Precautions

WORKING CONDITIONS

1.Refrain from operating the blower if you are tired, ill, or upset, or if you are under the influence of alcohol, drugs or medication

2.To reduce the risk of hearing loss associated with sound levels, hearing protection is required.

3.To reduce the risk of injury associated with thrown objects,

always wear eye protection and foot protection. Approved protective goggles must comply with standard ANSI Z87.1 in the USA or EN 166 in EU countries.

4. To reduce the risk of injury associated with the inhalation of dust, use a face filter mask in dusty conditions.

5. Wear rubber-soled shoes or shoes with some other form of anti-slip protection to help protect you against falling.

6.To reduce the risk of injury associated with objects being

drawn into rotating parts, do not wear loose clothing, scarves, neck chains, hair longer than shoulder length, or other loose material.

7.Prolonged use of a blower, exposing the operator to vibrations and cold, may produce whitefinger disease (Raynaud’s phenomenon), the symptoms of which include tingling and burning sensations followed by loss of color and numbness in the fingers. All factors which contribute to whitefinger disease are not known, but cold weather, smoking diseases or physical conditions as well as long periods of exposure to vibration are mentioned as factors. In order to reduce the risk of whitefinger disease, the following precautions are strongly recommended

a)Keep your body warm. Avoid using the blower during rain.

b) Take more than 5 minutes of break in a warm place fre- quently.

c) Maintain a firm grip at all times, but do not squeeze the handles with constant, exces- sive pressure.

d) If you feel discomfort, redness and swelling of your fingers or any other part of your body, see a doctor before it gets worse.

8.The ignition system of your unit produces an electromagnetic field of a very low intensity. This field may interfere with some pacemakers. To reduce the risk of serious or fatal injury, people with pacemaker should consult their physician and the pacemaker manufacturer before operating this tool.

WORKING CIRCUMSTANCE

1. To reduce the risk of injury associated with exhaust fume inhalation, do not operate in unventilated area. The exhaust gases contain harmful carbon monoxide.

2.Avoid using the blower where stable footing and balance are not assured.

3.Never operate the machine in high wind, bad weather, potentially explosive atmosphere, when visibility is poor or in very high or low temperatures. (Our recommended use environment is below 40 degrees C (104 degrees F).)

AVOID NOISE PROBLEM

NOTE

Check and follow the local regulations as to sound levels and hours of operations for blower.

1.Operate power equipment only at reasonable hours, not early in the morning or late at night when people might be disturbed. Comply with times listed in local ordinances.

2.To reduce sound levels, limit the number of pieces of equipment used at any one time.

3.Operate power blowers at the lowest possible throttle speed to do the job.

4.Check your equipment before operation, especially the muffler, air intakes and air filters.

WORKING PLAN

To reduce the risk of health damages, avoid excessive use and take sufficient time to rest .

FUEL

WARNING

To reduce the risk of fire and burn injury:

a)Handle fuel with care. It is highly flammable.

b)Do not smoke while handing fuel.

c)Do not refuel a hot engine.

d)Do not refuel a running engine.

e)Avoid spilling fuel or oil. Always wipe unit dry before using.

f ) Move at least 10 ft. (3 meters)

away from the fueling point before starting the engine.

g)Always store gasoline in a container approved for flammable liquids.

h)Make sure the unit is properly assembled and in good operating condition.

i ) Do not use the blower near a fire, as aiming the blower in the direction of a flame may cause flammable substances to ignite.

6

Image 6
Contents 380BTS/BFS English Applicable Serial Numbers 80100101 and upOWNER’S Warranty Responsibilities Your Warranty Rights and ObligationsWhat is not Covered Warranty COMMENCE- Ment DateContents Safety Safety FirstSymbols For EPA & Carb Symbols on the machineSafety Precautions ModelWorking Circumstance Avoid Noise ProblemWorking Conditions Working PlanBefore Starting the Engine Using the ProductTemperature of the machine may increase after stopping 330BT 350BT/BF 370BTS/BFS 380BTS/BFSMaintenance TransportationStorage What is what? 330BT„ Disposal 350BT/BF 350BT 350BF370BTS/BFS 370BTS 370BFS380BTS/BFS 380BTS 380BFSModel 330BT 350BT 350BF 370BTS 370BFS 380BTS 380BFS„ Right Handle 350BF/370BFS/380BFS Assembly„ Swivel Joint „ Handlebar Option 330BT/350BT/370BTS/ 80BTS3„ Blower Tubes „ Harness330BT has no waist belt „ Fuel „ HOW to MIX FuelFuel „ Fueling the UnitOperation „ Control ARM 350BF/370BFS/380BFS„ Starting Engine „ Adjusting Idle Speed „ Stopping EngineMaintenance „ AIR CleanerCleaning AIR Filter „ Muffler „ Fuel Filter„ Spark Plug „ Spark Arrester„ Ignition Coil AIR GAP Inspection Storage„ AIR Inlet NET „ Sholder Strap