English
Symbols on the machine
(a) | (b) | (c) | (d) |
|
|
|
|
|
|
|
|
For safe operation and maintenance, symbols are carved in relief on the machine. Using to these indications, please be careful not to make a mistake.
(a)The port to refuel the "MIX GASOLINE" Position: FUEL TANK CAP
(b)The direction to close the choke Position: INTAKE CUP
(e) The emission information label
(c)The direction to open the choke Position: INTAKE CUP
(d)The direction to stop the engine
Position: CONTROL HANDLE[130 BT/350 BT/370 BTS/380BTS only]
∗1 : THE ACTUAL MANUFACTURING MONTH WILL BE PRINTED.
A : Model | B : ENGINE | C : ENGINE |
| FAMILY | DISPLACEMENT |
|
|
|
130BT | AHQZS.0294BK ∗2 | 29cc |
350BT/BF | AHQZS.0505BP ∗2 | 50cc |
370BTS/BFS | AHQZS.0655BE ∗2 | 65cc |
380BTS/BFS | AHQZS.0725PQ ∗2 | 72cc |
∗2 : THE INITIAL CODE WILL BE CHANGED EVERY YEAR OF MANUFACTURING.
This engine label certifies that the product is certified in accordance with American exhaust emissions requirements EPA Ph III and CARB Tier III. The Emissions Compliance Period referred to on the emissions Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal and California emission requirements.
For customer assistance call:
us at our website: www.husqvarna.com
Safety Precautions
WARNING
1.Read this Blower Operator Manual carefully. Be sure you understand how to operate this unit properly before you use it. Failure to do so could result in serious injury.
2.Be sure to keep this manual handy so that you may refer to it later whenever any questions arise. Also note that you are requested to contact the dealer from whom you purchased the product for assistance the
event that you have any questions which cannot be answered herein.
3.Always be sure to include this manual when selling, lending, or otherwise transferring the ownership of this product.
4.Do not lend or rent your machine without the owner's manul.
5.Be sure that anyone using your unit understands the information contained in this manual.
6.Never let a child use the machine.
7.
8.Under no circumstances may the design of the machine be modified without the permission of the manufacturer. Always use genuine accessories.
9.A blower is a dangerous tool if used carelessly or incorrectly and can cause serious, even fatal injuries. It is extremely important that you read and understand the contents of this Operator’s manual.
10.Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.
11.The machine is only designed for blowing lawns, pathways, asphalt roads and the like.
WORKING CONDITIONS
5