Husqvarna 180BT, 150BT manual Symbols on the machine, Safety Precautions

Page 6

English

Symbols on the machine

(a)

(b)

(c)

(d)

 

 

 

 

 

 

 

 

For safe operation and maintenance, symbols are carved in relief on the machine. Using to these indications, please be careful not to make a mistake.

(a)The port to refuel the "MIX GASOLINE" Position: FUEL TANK CAP

(b)The direction to close the choke Position: INTAKE CUP

(c)The direction to open the choke Position: INTAKE CUP

(d)The direction to stop the engine Position: THROTTLE LEVER

Safety Precautions

WARNING

1.Read this Blower Operator Manual carefully. Be sure you understand how to operate this unit properly before you use it. Failure to do so could result in serious injury.

2.Be sure to keep this manual handy so that you may refer to it later whenever any questions arise. Also note that you are requested to contact the dealer from whom you purchased the product for assistance the event that you have any questions which cannot be answered herein.

3.Always be sure to include this manual when selling, lending, or otherwise transferring the ownership of this product.

4.Do not lend or rent your machine without the owner's manul.

5.Be sure that anyone using your unit understands the information contained in this manual.

6.Never let a child use the machine.

7.Long-term exposure to noise can result in permanent hearing impairment. So always use approved hearing protection.

8.Under no circumstances may the design of the machine be modified without the permission of the manufacturer. Always use genuine accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others.

9.A blower is a dangerous tool if used carelessly or incorrectly and can cause serious, even fatal injuries. It is extremely important that you read and understand the contents of this Operator’s manual.

10.Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.

11.The machine is only designed for blowing lawns, pathways, asphalt roads and the like.

6

Image 6
Contents 130BT 150BT 170BT E13*97/68SH3G3*2002/88*0334*00 EC-declaration of conformityE13*97/68SH2G3*2002/88*0098*02 Cispr 122005, ISOE13*97/68SH3G3*2002/88*0223*02 E13*97/68SH3G3*2002/88*0106*02Contents Safety Safety FirstSymbols on the machine Safety PrecautionsWorking Circumstance Avoid Noise ProblemWorking Conditions Working PlanUsing the Product Before Starting the EngineMaintenance TransportationStorage What is what? 130BT„ Disposal 150BT 170BT 180BT ABSTechnical data Model130BT 150BT 170BT 180BT Assembly F10 F11 F12 „ Harness„ Waist Belt 150BT 170BT 180BT 130BT has no waist belt„ Fuel „ HOW to MIX FuelFuel „ Fueling the UnitF14 Operation„ Starting Engine F15„ Adjusting Idle Speed „ Stopping EngineCleaning AIR Filter Maintenance„ AIR Cleaner F24„ Muffler „ Fuel Filter„ Spark Plug „ Spark Arrester„ Ignition Coil AIR GAP Inspection Storage„ AIR Inlet NET „ Sholder Strap