Husqvarna 356BT manual Contents

Page 3

CONTENTS

Contents

 

KEY TO SYMBOLS

 

Symbols

2

CONTENTS

 

Contents

3

Note the following before starting:

3

SAFETY INSTRUCTIONS

 

Personal protective equipment

4

Machines safety equipment

4

Checking, maintaining and servicing the machines

 

safety equipment

5

General safety precautions

6

General working instructions

7

WHAT IS WHAT?

 

What is what on the blower?

9

ASSEMBLY

 

Assembling the blow pipe and control handle

10

FUEL HANDLING

 

Fuel

11

Fuelling

11

STARTING AND STOPPING

 

Starting and stopping

12

MAINTENANCE

 

Carburettor

13

Muffler

14

Cooling system

14

Spark plug

14

Air filter

15

Maintenance schedule

16

TECHNICAL DATA

 

Technical data

17

EC-declaration of conformity

18

Note the following before starting:

Please read the operator’s manual carefully.

Long-term exposure to noise can result in permanent hearing impairment. So always use approved hearing protection.

WARNING! Under no circumstances may the

!design of the machine be modified without the permission of the manufacturer. Always use genuine accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others.

WARNING! A blower is a dangerous tool if

!used carelessly or incorrectly and can cause serious, even fatal injuries. It is extremely important that you read and understand the contents of this Operator’s manual.

Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.

The machine is only designed for blowing lawns, pathways, asphalt roads and the like.

English – 3

Image 3
Contents 356BTX-SERIES 356BFX-SERIES Symbols KEY to SymbolsContents Personal protective equipment Safety InstructionsMachine′s safety equipment Stop switchMuffler Starting General safety precautionsFuel safety GeneralAdjusting the harness Basic safety rulesGeneral working instructions BTX-SERIES Basic working techniquesWhat is what on the blower? What is WHAT?Assembly Assembling the blow pipe and control handleAttachments Fuel Handling FuelFuelling Warm engine Starting and StoppingStarting and stopping Cold engineCarburettor MaintenanceMuffler Cooling systemSpark plug Cleaning the air filter Air filterOiling the air filter Monthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data Technical DataApplies to Europe only EC-declaration of conformityPage 1140208-26 ´z+H4r¶6¨ ´z+H4r¶6¨