Husqvarna 356BT manual Muffler

Page 5

SAFETY INSTRUCTIONS

Muffler

The muffler is designed to keep noise levels to a minimum and to direct exhaust fumes away from the user.

In countries that have a warm and dry climate there is a significant risk of fire. Consequently, we have equipped the muffler with a spark arrestor mesh mounted inside the muffler.

For mufflers it is very important that you follow the instructions on checking, maintaining and servicing your machine. See instructions under the heading Checking, maintaining and servicing the machine’s safety equipment.

WARNING!

!

Bear in mind that: Engine exhaust fumes contain carbon monoxide, which can cause carbon monoxide poisoning. For this reason you should not start or run the machine indoors, or anywhere that is poorly ventilated.

The exhaust fumes from the engine are hot and may contain sparks which can start a fire. Never start the machine indoors or near combustible material!

WARNING! The inside of the muffler contain

!chemicals that may be carcinogenic. Avoid contact with these elements in the event of a damaged muffler.

Checking, maintaining and servicing the machines safety equipment

WARNING! All servicing and repair work on

!the machine requires special training.This is especially true of the machines safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of our products we guarantee the availability of professional repairs and service. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent.

Stop switch

Start the engine and make sure the engine stops when you move the stop switch to the stop setting.

Vibration damping system

Check the vibration damping units regularly for cracks or deformation. Replace them if damaged.

Check that the vibration damping element is undamaged and securely attached.

Muffler

Never use a machine that has a faulty muffler.

English – 5

Image 5
Contents 356BTX-SERIES 356BFX-SERIES Symbols KEY to SymbolsContents Machine′s safety equipment Safety InstructionsStop switch Personal protective equipmentMuffler Fuel safety General safety precautionsGeneral StartingGeneral working instructions Adjusting the harnessBasic safety rules BTX-SERIES Basic working techniquesWhat is what on the blower? What is WHAT?Attachments AssemblyAssembling the blow pipe and control handle Fuelling Fuel HandlingFuel Starting and stopping Starting and StoppingCold engine Warm engineCarburettor MaintenanceSpark plug MufflerCooling system Oiling the air filter Cleaning the air filterAir filter Daily maintenance Maintenance scheduleWeekly maintenance Monthly maintenanceTechnical data Technical DataApplies to Europe only EC-declaration of conformityPage 1140208-26 ´z+H4r¶6¨ ´z+H4r¶6¨